The porosity of platinum nanoparticle aggregates (PtNPs) is investigated electrochemically via particle-electrode impacts and by XPS. The mean charge per oxidative transient is measured from nanoimpacts; XPS shows the formation of PtO and PtO2 in relative amounts defined by the electrode potential and an average oxidation state is deduced as a function of potential. The number of platinum atoms...

Manganese-nickel (Mn-Ni) oxide films were electrodeposited on a graphite sheet in a bath consisting of manganese acetate and nickel chloride, and the structural, morphological, and electrochemical properties of these films were investigated. The electrodeposited Mn-Ni oxide films had porous structures covered with nanofibers. The X-ray diffractometer pattern revealed the presence of separate ma...

A three-dimensional microfluidic origami glucose-air immuno-biofuel cell has been successfully demonstrated for the first time to implement self-powered, sensitive, and low-cost sandwich immunoassay for cancer markers based on the signal amplifications of a porous Au-paper electrode and Au nanoparticles attached to carbon nanotubes.

We report a facile solution process to synthesize monodisperse porous nanodiscs through confined molecular self-assembly of surfactants and ZnTPyP. The nanodiscs exhibit trimodal pores with fluorescent and crystalline wall structures, and are potentially important for sorption and separation, sensors, catalytic materials, electrode materials, etc.

An excellent, platinum free fiber counter electrode (CE) was successfully fabricated, consisting of porous, single crystalline titanium nitride (TiN) nanoplates grown on carbon fibers (CF). The fiber-shaped dye-sensitized solar cells (FDSSCs) based on the TiN-CF CE show a high conversion efficiency of 7.20%, comparable or even superior to that of the Pt wire (6.23%).

Procedures and results are described for multiplexed immunochemical assays using semiconductor microchips. The microchips used here are miniaturized arrays of individually addressable microelectrodes controlled by active CMOS circuitry. Electrode densities exceed 1000 per cm2. The array chips are coated with a porous reaction layer material to provide a ‘biofriendly’ milieu overlaying the elect...

A biofuel cell (BFC) cathode has been developed based on direct electron transfer (DET) of hemoglobin (Hb) molecules with an indium-tin-oxide (ITO) electrode and their electrocatalysis for reduction of hydrogen peroxide (H2O2). In this study, the ITO-coated glass plates or porous glasses were prepared by using a chemical vapor deposition (CVD) method and examined the electrochemical characteris...

Lithium-air batteries have the potential to become the future energy source for electric vehicles. Typically, the battery consists of a lithium metal negative electrode, a porous separator soaked with liquid electrolyte, and a porous air electrode where oxygen from the surrounding atmosphere is reduced during battery discharge. This configuration yields the highest theoretical capacity of all L...

The phytohormone abscisic acid (ABA) is the major player in mediating the adaptation of plants to stress. Previously developed phytohormonal biosensors usually employed indirect detection of the products of conjugated oxidase reactions. A label-free electrochemical impedance immunosensor for ABA detection was developed using an anti-ABA antibody adsorbed directly on a porous nanogold film. The ...

A novel composite electrode structure with highly-conductive 3D nanotube networks superimposed into interlaced porous LiFePO(4) media was designed and realized via an in situ sol-gel process, yielding a high-performance multidimensional composite cathode for high-energy and high-power lithium-ion batteries.