A novel proton exchange membrane has been prepared using sulfonated poly(styrene-divinylbenzene) resin(SPSDR)–polyethylene(PE). The membrane is characterized by FT-IR, SEM and TGA/DSC. Water uptake, oxidative resistance, ionic conductivity and methanol permeability are measured to evaluate its performance in a direct methanol fuel cell. The on-set degradation temp...

in this research the simulation of an air independent proton exchange membrane fuel cell (pemfc) propulsion system was taken into consideration. the system consists of several parts including pem fuel cell stack, metal hydride and liquid oxygen (lox) tanks, and also pre-heaters of oxygen and hydrogen gases along with other heat exchangers, to ensure proper operation of system. the heat recovery...

the reported work is on the preparation and characterization of polyvinyl alcohol -g- polyacrylic acid (pva-g-paa)/ polybenzimidazole sulfone (pbis) cation exchange membrane used for the electro dialysis of sodium chloride solution. the polymer syrup has been prepared using the grafting method with the help of polyvinyl alcohol and polyacrylic acid in the presence of water solvent. the polymer ...

An inorganic proton exchange membrane based on sintered mesoporous silica and phosphoric acid was developed with a high proton conductivity of 0.06 S cm(-1) at 200 °C, achieving an excellent power output of 689 mW cm(-2) in H2 at 190 °C and 200 mW cm(-2) in methanol at 200 °C with no external humidification.

Functionalized graphene oxide (FGO) reinforced quaternized poly(ether ether ketone) membranes were prepared for high temperature proton exchange membrane applications. The introduction of FGO significantly improved the mechanical strength and oxidative stability of these membranes at a high doping level. These reinforced membranes showed high tensile strength up to 40 MPa and high proton conduc...