This paper presents a study on optimization of process parameters using genetic algorithm to minimize angular distortion in 202 grade stainless steel gas tungsten arc welded plates. Angular distortion is a major problem and most pronounced among different types of distortion in butt welded plates. The extent of distortion depends on the welding process control parameters. The important process ...

The welding use correct process parameters will produce joint with optimum in mechanical properties. current is a very important parameter welding. Gas Tungsten Arc Welding carbon steel A53 Gr B uses variations can be an option to get the best quality joints. purpose of this research properties and microstructure by varying current. experimental method GTAW A 53 using single V butt 5G position,...

Aluminum alloy welding suffers from problems such as solidification cracking and hydrogen-induced porosity, which are sufficiently severe to limit its potential applications. Because mitigated porosity incidence and solidification cracking are observed in aluminum welds using double pulsed gas metal arc welding (DP-GMAW), a comprehensive review of the mechanism is necessary, but absent from the...

The objective of the present experimental work is to obtain an appropriate welding parameter on pulsed current gas tungsten arc (GTAW) ferritic stainless steel AISI 409L with a thickness 4.5 mm. Frequency affected penetration, and ratio bead width penetration (aspect ratio) main research. A Taguchi L9 orthogonal array three level four factors was chosen execute plate welding. It leads optimize ...

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generat...

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

This paper presents a passive polarimetry method using a wavefront division optical device in order to measure the temperature distribution at the weld pool surface. We studied thermal emission from a hot liquid metal at a nearinfrared wavelength corresponding to a blind spectral window of the helium plasma generated during Gas Tungsten Arc Welding (GTAW) process. The refractive index of liquid...