When large capacity distributed generation including photovoltaic (PV) systems are installed in power systems, reverse power flow from PV systems may cause problem of surplus electric power. To reduce the reverse power flow without the reduction of PV power generation, energy management of customer equipment such as electric water heater is one of the solutions. Therefore, cooperative control o...

Maximization of power from a solar photovoltaic (PV) module is of special interest as the efficiency of the solar PV system is very low. A maximum power point tracker (MPPT) is needed to operate the PV array at its maximum power point. The present work describes the design and implementation of a MPPT for the solar PV array connected to a resistive load. The design consists of a dc-dc boost con...

unlike traditional power grids, smart grids have the advantage of bidirectional power flow and having distributed generations. distributed generation systems are usually supplied by renewable sources which can cause unpredicted voltage fluctuations as a result of being intermittent. while traditional compensating devices deal with the problem of voltage fluctuation and reduced power quality wit...

An electrolytic capacitors used as a decoupling reservoir which restrict the lifetime of photovoltaic (PV) micro inverters. This has led to the development of several improved decoupling circuits that can reduce the capacitor value to allow the use of non electrolytic types. The project focus on selection of the minimum decoupling capacitor value for the proper operation of discontinuous conduc...

The quantity of installed photovoltaic (PV) systems in the German distribution grid is still increasing. In some areas the installed PV capacity exceeds 5.0 kWp [1] per house connection (HC). Therefore the load flow changes its characteristics and leads to new requirements for grid dimensioning. Additionally, the feed-in is carried out via inverter systems and a lot of power electronics have to...

-This paper presents a steady-state model of a gridconnected photovoltaic (PV) system using Electromagnetic Transient Program (EMTP) MODELS. Recently the PV system has been introduced in power systems. The previous PV generation was used only to supply small loads or for home use. Nowadays, installations of grid-connected PV systems are increasing due to several advantages compared to standalon...

Partial shading of a PV installation has a disproportionate impact on its power production. This paper presents background and experimental results from a single string grid-tied PV system, operated under a variety of shading conditions. In this configuration a shadow can represent a reduction in power over 30 times its physical size. Results are presented relating size and positions of shading...

Abstract In power generation, several problems, such as high gain settings in the automatic voltage regulator and many transmission networks, can increase low-frequency oscillations line. This study aims to determine stability adjustment of Hybrid PV - Diesel Generating Load Frequency. this study, simulation was done by using Simulink Matlab program. The control design is applied finding optimu...