In the present work traditional ingot metallurgy plus rapid solidification techniques were used to in situ produce Al-TiC composites with refined microstructures and enhanced dispersion hardening of the reinforcing phases. Microstructural characterization of the experimental materials were comprehensively done by optical, electron microscopy and X-ray diffraction. The results show that the in s...

To investigate the structural evolution and hereditary mechanism of icosahedral nano-clusters formed during rapid solidification, a molecular dynamics (MD) simulation study has been performed for a system consisting of 107 atoms of liquid Mg70Zn30 alloy. Adopting Honeycutt-Anderson (HA) bond-type index method and cluster type index method (CTIM-3) to analyse the microstructures in the system it...

Effects of different pressures on the isothermal-solidification process pure Al were studied by molecular dynamics (MD) simulation using embedded-atom method (EAM). was first subjected to a rapid-cooling process, and then it annealed under conditions. Mean first-passage times (MFPT) method, Johnson-Mehl-Avrami (JMA) law, X-ray diffraction (XRD) analysis used qualify solidification- kinetic proc...

Mg has been considered a promising biomaterial for bone implants. However, the poor corrosion resistance has become its main undesirable property. In this study, both alloying Mn and laser-melting were applied to enhance the Mg corrosion resistance. The corrosion resistance, mechanical properties, and microstructure of rapid laser-melted Mg-xMn (x = 0-3 wt %) alloys were investigated. The alloy...

As with the consolidation time, the cooling rate applied during the solidification stage of the composite processing cycle influences the total processing cycle time, as well as the mechanical performance. By controlling the solidification rate, changes in the matrix morphology and crystallinity can be achieved, and hence different mechanical properties may be obtained. Control of the solidific...

This paper presents an eddy-current-based technique for imaging the solidification of molten metal inside a metal pipe. This technique is motivated by the fact that the ac (alternating current) impedance seen from a solenoid placed outside the pipe is dependent on the distribution of the solidification inside the pipe provided that the ac frequency is properly chosen and the overall thickness o...

Thin amorphous Ge films on glass substrates are irradiated by single picosecond ~ps! laser pulses and the induced melting and solidification process is followed by means of real-time reflectivity measurements with ps resolution using a setup based on a streak camera. Due to the excellent time resolution achieved in single exposure, the recalescence process occurring upon solidification can be c...

The optimal design of risers for castings has been the subject of numerous investigations and this paper determines the optimal dimensions when Chvorinov’s rule for solidification is obeyed by both the riser and casting and solidification time is the only constraint involved .This problem can be formulated to minimize the riser volume subject to the constraint that the riser solidification time...

The solidification of gamma TiAl alloys is of interest to the aerospace and automotive industries. A gamma TiAl multicomponent alloy: Ti–45.5Al–4.7Nb–0.2C–0.2B (at. %) has been the focus of a study to investigate the solidification conditions that led to a Columnar to Equiaxed Transition (CET) in a directional solidification experiment where traditional Bridgman solidification was combined in s...