Amathematical model of a direct-fired continuous strip annealing furnace is developed. The first-principle model uses the heat balance to describe the dynamic behavior of the strip and the rolls. Themass and the enthalpy balance are employed to calculate themass, the composition, and the temperature of the flue gas. The heat conduction equation of the furnace wall is discretized bymeans of the ...

In this study an expression for soot absorption coefficient is introduced to extend the weighted-sum-of-gray gases data to the furnace medium containing gas-soot mixture in a utility boiler 150 MWe. Heat transfer and temperature distribution of walls and within the furnace space are predicted by zone method technique. Analyses have been done considering both cases of presence and absence of soo...

The associated mineral ore accompanying Valuable Metal Compounds (VMC) have been usually treated in a smelting furnace ,such as Blast Furnace, Reverberatory, Blowing Furnace, hence the VMC were mostly concentrated into the molten associated slags and separated from liquid metals. So the associated slags become an important man-made resources (Table I), in which the VMC exist dispersively in var...

Co-firing ramie residue with coal was carried out in a thermogravimetric analyzer and a cyclone furnace to evaluate the effects of coal fraction (0 to 30 wt. %) on combustion performance. Thermogravimetric analysis (TGA) results showed that devolatilisation was the predominant process when the coal percentage in the blend was below 30 wt. %. For pure biomass firing in the cyclone furnace, an op...

The radiation element method by ray emission method, REM , has been formulated to predict radiative heat transfer in three-dimensional arbitrary participating media with nongray and anisotropically scattering properties surrounded by opaque surfaces. To validate the method, benchmark comparisons were conducted against the existing several radiation methods in a rectangular three-dimensional med...

one of the important issues in hydraulic engineering is inspection of local scour depth around bridge pier. using piles is one of the ways for confronting local scour and erosion. in this study, the experiments were conducted in an 8m long, 0.5m deep and 0.25m wide flume. and the effectof using piles and number of them observed on the amount of scour in three different frude numbers. the shape ...

In this paper neuro-fuzzy technique is used for the first time in modeling eco-friendly furnace parameters to predict the melting rate of the molten metal required to produce homogenous and quality castings. The relationship between the process variables (input) viz. flame temperature, preheat air temperature, rotational speed of the furnace dome, percentage of excess air, melting time, fuel co...

Cracking furnace system is the starting and the most critical sector of an ethylene plant where heavier components are cracked into lighter products, such as ethylene, propylene, and etc. During the production, coking can adversely affect the manufacturing performance, such that furnaces have to be decoked for some controlled time. The cracking and decoking processes both influence the plant pr...

A large amount of blast furnace slag is generated in China. Most ground granulated blast furnace slag (GGBS) however ends up in low-grade applications. Blast furnace slag, ground to an appropriate fineness, can be used as a partial replacement of cementitious material in concrete. The potential for using GGBS in structural concrete, e.g. concrete beams and columns is investigated at Xi’an Jiaot...

In this paper, a positive effect of rapid thermal annealing (RTA) technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC) matrix system. Amorphous Si-rich SiC layer has been deposited by co-sputtering in different Si concentrations (50 to approximately 80 v%). Si nanocrystals (Si-NC) containing different grain sizes have bee...