The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 8C. The NiAl-W composites exhibited a three-stage creep behavior, with ...

Recent experimental studies of the hot isostatic consolidation of Ti-6Al-4V–coated SiC fibers contained in cylindrical canisters have revealed an unexpectedly high rate of creep densification. A creep consolidation model has been developed to analyze its origin. The initial stage of consolidation has been modeled using the results of contact analyses for perfectly plastic and power-law creeping...

Damage evolution during low cycle fatigue, creep, and their interaction behavior is actually a ductility exhaustion process in response to cyclic and static creep. In this article, a novel viscosity-based model for low cycle fatigue creep life prediction is presented in an attempt to condition viscosity-based approaches for general use in isothermal and thermo-mechanical loading. In this model,...

A theoretical model is suggested which describes the yield stress dependence on grain size in fine-grained materials, based upon competition between conventional dislocation slip, grain boundary diffusional creep (Coble creep) and triple junction diffusional creep. In the framework of the model, the contribution of diffusional creep mechanisms to plastic deformation increases with reduction of ...

Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...

Original scientific paper The nonlinear creep characteristics of typical clays in the coastal area of Tianjin were studied by consolidated-undrained triaxial creep tests. The tests were performed via the stepwise loading method, and the creep curves of the soft clays under different stress states were obtained from the raw data processed by Chen and Kang’s method. The experiments showed that th...

Electronic power modules devices are paramount components in the aeronautical, automotive and military applications. The solder layers are the most critical parts of the module and are usually subjected in their whole life to complex loading conditions. To improve the design task, realistic thermoelastoviscoplastic and lifetime prediction models which can describe efficiently the deformation-da...

Native collagen gels are important biomimetic cell support scaffolds, and a plastic compression process can now be used to rapidly remove fluid to any required collagen density, producing strong 3D tissue-like models. This study aimed to measure the mechanical creep properties of such scaffolds and to quantify any enhanced creep occurring in the presence of cells (cell-mediated creep). The test...

mechanism and factors influencing on creep behavior of clay soil have not been understood yet due to its complex structure. in this paper, to investigate the affecting parameters on the creep behavior of the clay soils such as stress level, over consolidated pressure and water pressure, odeometr test are performed in states of single stage, stepwise and overloaded-unloaded and the creep mechani...

INTRODUCTION The aim of the present paper is to compare creep behaviour of aluminium-based alloy (2024AA) prepared by an identical technology with and without reinforcement by short alumina fibres and with two different orientations of fibres. The observed behaviour is analyzed in terms of back stresses obtained by threshold stress approach from steady-state data or by the internal stress appro...