Steel plate shear walls usually do not satisfy the strong-column weak-beam design criteria, leading to larger column sections. On other hand, rigid frame structures are typically constructed in low-rise mid-rise buildings built locations prone strong earthquakes due their high flexibility and cost-effective solutions. Overcoming these restrictions SPSW system, this paper is dedicated employing ...

This paper summarizes an experimental program supported by an analytical modeling study undertaken to investigate the bond behavior of carbon fiber reinforced polymer (CFRP) materials used for strengthening steel structures. The experimental program consisted of three double-lap shear coupon tests and five large-scale beam tests. Different methods to reduce the bond stress concentrations near t...

A series of tests was conducted on six 2.7 m × 3.7 m shear wall specimens consisting of cold-formed steel framing sheathed on one side with sheet steel adhered to gypsum board and on the opposite side with plain gypsum board. The specimens were subjected to various sequences of simulated seismic shear deformation and fire exposure to study the influence of multi-hazard interactions on the later...

this paper provides a comparison of the maximum inter-story drifts and tip acceleration of both a 16 and 30 stories building each with different structural systems; hybrid r.c moment frame with shear walls and hybrid steel frame with shear walls and x bracing which are equipped by passive dampers. each of the building models were analyzed as fully non-linear structures for variety of dampers pl...

Abstract: Six specimens of concrete frame columns reinforced by post-build wing walls on the opposite faces were designed and fabricated to investigate their seismic performance. Axial compression ratio was considered as the critical factor and divided into 0.31, 0.36, and 0.40 before reinforcement. HRB400 steel grade was used to the longitudinal bar and the ratio of longitudinal reinforcement ...

Passive protection systems based on the use of metal shear panels represent an effective way for achieving a significant improvement of the seismic response of buildings. Nevertheless, the dissipative capacity of these devices could be limited by buckling phenomena. In order to reduce the influence of instability, "Buckling Inhibited Shear Panels" have been recently introduced as an innovative ...

This paper presents the results of an analytical investigation conducted to replicate experimentally obtained behavior, and better understand the behavior of the proposed structural fuse concept for bridges that is presented in a companion paper. First, a steel plate shear link (SPSL) proposed as a new type of structural fuse is described. Equations are derived to define its shear-moment intera...