this paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. a laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...

Welding hot-work tool steels, containing 0.3-0.6% of carbon, is difficult both because of the elevated carbon content and because of significant hardening resulted from large amounts of alloying elements. A development of welding technology, i.e. better quality of electrodes, modern welding devices, improved welding technologies and better steel quality, make welding of such steel types possibl...

The possibility to obtain multiphase steels with considerable fractions of retained austenite, which is of key interest for the occurrence of the TRIP effect, is investigated in steels with low amounts of Si and Al. Special emphasis is dedicated to the microstructural observation of this phase, since its volume fraction, distribution and stability, related to the carbon content, will determine ...

Mature passive films (age > 10 s) were grown in aerated saturated calcium hydroxide solution, at the open circuit, on plain steel and alloys with 9% and 22% Cr, as well as austenitic stainless steels. The materials were commercially produced concrete reinforcing steels. Differences in the polarization of the oxygen reduction reaction were evidenced. Oxygen reduction rates at moderate cathodic p...

This paper presents a study of the quasi-static and dynamic deformation behaviors of conventional and microalloyed medium-carbon steels in a wide temperature range. As strain rate increased, the flow stress increased at room temperature, but occasionally did not at elevated temperatures. The flow stress of the microalloyed steel containing precipitates was less sensitive to strain rate at room ...

Microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. In this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and Zr content. The results show that after homogenization, variations in thickness have no effect on the hardness. Also, after hea...

Modern vehicle bodies make intensive use of high strength steel grades to meet the contradicting demand of lighter weight and simultaneously better mechanical performance. For many steel grades microalloying by niobium is the key to achieve their characteristic property profile. In HSLA steels niobium enhances the strength primarily by grain refinement. In interstitial free high strength steels...

For almost two decades now, Luc Steels has been a leading pioneer of two novel approaches to studying language evolution. Methodologically, he has pioneered the artificial approach [1, henceforth AA]; theoretically, he has pioneered the cultural approach [2, henceforth CA]. In this paper [3], Steels (i) situates these approaches within their broader scientific context, (ii) provides an integrat...

Cryogenic treatment (CT) is the supplementary process to conventional heat treatment process in steels, by deep–freezing materials at cryogenic temperatures to enhance the mechanical and physical properties of materials being treated. Cryogenic treatment (CT) of materials has shown significant improvement in their properties .Various advantages like increase in hardness, increase in wear resist...

This paper presents a system that simulates the emergence of realistic vowel systems in a population of agents that try to imitate each other as well as possible. The agents start with no knowledge of the sound system at all. Although none of the agents has a global view of the language, and none of the agents does explicit optimization, a coherent vowel system emerges that happens to be optima...