Magnesium (Mg) and its alloys posses low density, high specific stiffness and electromagnetic shielding property, which are attractive to the automobile industry, 3C (computer, communication, consumer electronics), military and aerospace industry. Mg alloys have relatively low open circuit potential and thus highly susceptible to galvanic corrosion when they are in touch with other metal materi...

In order to improve the corrosion and wear resistance of biomedical Ti-6Al-4V implants, a Ta₂N nanoceramic coating was synthesized on a Ti-6Al-4V substrate by the double glow discharge plasma process. The Ta₂N coating, composed of fine nanocrystals, with an average grain size of 12.8 nm, improved the surface hardness of Ti-6Al-4V and showed good contact damage tolerance and good adhesion streng...

Background: Titanium (Ti) implants are commonly coated with hydroxyapatite (HA). However, HA has some disadvantages such as brittleness, low tensile strength and fracture toughness. It is desirable to combine the excellent mechanical properties of ZrO2 and the chemical inertness of Al2O3 with respect to the purpose of this project which was coating Ti implants with HA-ZrO2-Al2O3 to modify the s...

Complications in dentistry and orthopaedic surgery are mainly induced by peri-implant bacterial infections and current implant devices do not prevent such infections. The coating of antibacterial molecules such as chitosan on its surface would give the implant bioactive properties. The major challenge of this type of coating is the attachment of chitosan to a metal substrate. In this study, we ...

Oil repellent surface have lots of practical applications in many fields. Current oil repellent coating may suffer from limited liquid repellency to oils or environmental risks. In this work, we report an eco-friendly 'green' processes for preparing oil-repellent surface using a renewable and environmentally benign bioresource alginate. The oil-repellent coating was prepared by a two-step surfa...

A fundamental study on the effect that pre-coating a substrate with metal spraying has on the properties of sputtered Titanium-nitride film (TiN film) was carried out. The residual stresses in TiN films sputtered on the substrates coated with various spray coatings were measured by X-ray stress measurement. It was observed that the residual stresses in TiN films sputtered on substrates coated b...

Fracture modes in a model glass–polymer coating–substrate system indented with hard spheres are investigated. The large modulus mismatch between the glass and polymer results in distinctive transverse fracture modes within the brittle coating: exaggerated circumferential (C) ring cracks that initiate at the upper coating surface well outside the contact (as opposed to the near-contact Hertzian ...

The aim of this study was to qualitatively demonstrate surface micro-morphological changes after the employment of different surface conditioning methods on high-alumina and glassy-matrix dental ceramics. Three disc-shaped high-alumina specimens (In-Ceram Alumina, INC) and 4 glassy-matrix ceramic specimens (Vitadur Alpha, V) (diameter: 5 mm and height: 5 mm) were manufactured. INC specimens wer...

Definable surface chemistry is essential for many applications of microfluidic polymer systems. However, small cross-section channels with a high surface to volume ratio enhance passive adsorption of molecules that depletes active molecules in solution and contaminates the channel surface. Here, we present a one-step photochemical process to coat the inner surfaces of closed microfluidic channe...

Low-cost and environmentally-friendly materials are investigated as carbon-coating precursors to modify the surface of commercial graphite for Li-ion battery anodes. The coating procedure and final carbon content are tuned to study the influence of the precursors on the electrochemical performance of graphite. Thermogravimetric analysis (TGA) and Brunauer– Emmett–Teller (BET) surface area analy...