The effect of fuel properties on the structure of swirling spray flames has been investigated. Droplet size, number density and velocity measurements have been carried out in pressureatomized spray flames using phase/Doppler interferometry. Four fuels with different physical properties were studied, namely n-heptane, methanol, 50/50 methanol/1-dodecanol mixture, and kerosene. The results indica...

This paper presented a novel method to detect the signal of the instantaneous infrared target based on the Finite Element Analysis (FEA). The radiation energy produced by flame infrared target was divided to finite element section. Studied the distribution of the unit area energy of flame in the detection system and the calculation method of flame radiation obtained by the photosensitive surfac...

Large-eddy simulation of premixed combustion is a computational challenge, because complex diffusion and reaction processes often occur in very thin layers. The interaction of these processes with turbulence determines the main properties of the flame brush, such as its burning velocity or its thickness. In turbulent flows, the large vortices wrinkle the flame brush and increase its surface, wh...

Flame-retardant and self-healing superhydrophobic coatings are fabricated on cotton fabric by a convenient solution-dipping method, which involves the sequential deposition of a trilayer of branched poly(ethylenimine) (bPEI), ammonium polyphosphate (APP), and fluorinated-decyl polyhedral oligomeric silsesquioxane (F-POSS). When directly exposed to flame, such a trilayer coating generates a poro...

This research addresses the flame structure of single aluminum particles burning in air with the emphasis on the transition from spherically symmetric to non-symmetric combustion regime. The unique feature of this work is that free motionless aluminum particles were produced and ignited in both normal and microgravity environments. That allowed us to observe whether the particle flame non-symme...

Liquid fuels(hydrocarbon and peroxide)are flammableand there is a risk of pool fires during their storage and transportation. In order to measure and develop effective methods for protection and considering safety distances, experimental studies and CFD simulations of pool fire of two hydrocarbon fuels (i.e. gasoline and kerosene) and peroxide (TBPB (tert-butyl peroxybenzoate)) were performed. ...

To safely mine coal, engineers must prevent gas combustion and explosions, as well as seek feasible and reasonable techniques to control for these types of incidents. This paper analyzes the causes and characteristics of methane combustion and explosions. Water mist is proposed to prevent and control methane combustion in an underground confined space. We constructed an experiment platform to i...

This article may be used for research, teaching, and private study purposes. Any substantial or systematic reproduction, redistribution, reselling, loan, sub-licensing, systematic supply, or distribution in any form to anyone is expressly forbidden. The publisher does not give any warranty express or implied or make any representation that the contents will be complete or accurate or up to date...

Flame acceleration and deflagration-to-detonation transitions (DDT) in large obstructed channels filled with a stoichiometric methane–air mixture are simulated using a single-step reaction mechanism. The reaction parameters are calibrated using known velocities and length scales of laminar flames and detonations. Calculations of the flame dynamics and DDT in channels with obstacles are compared...

Investigations into the chemical composition of soot particles often rely on samples extracted from the flame environment for subsequent analysis by mass spectrometry. These mass spectra have contributed to the general consensus that polycyclic aromatic hydrocarbons (PAHs) are involved in soot nucleation and surface growth processes. In the pioneering work of Dobbins et al., soot and soot precu...