Realistic simulations are increasingly demanded to clarify the dynamic behaviour of foam materials, because, on one hand, the significant variability (e.g. 20% scatter band) of foam properties and the lack of reliable dynamic test methods for foams bring particular difficulty to accurately evaluate the strain-rate sensitivity in experiments; while on the other hand numerical models based on ide...

There exists some inconsistence regarding the true residual stress profiles by hard turning and grinding AISI 52100 steel (62 HRc). This study aims to clarify the pressing issues for five surface types: hard turned fresh, hard turned with a white layer, ground fresh, ground with a white layer, and as-heat-treated. The key findings are: (i) hard turned fresh surfaces produce surface compressive ...

OBJECTIVE To test if the addition of chlorhexidine digluconate (CHD) might influence the mechanical properties and antibacterial properties of two different conventional glass ionomer cements (GICs) used for band cementation. MATERIALS AND METHODS Two commercial brands of conventional GICs were used: Ketac Cem Easymix (3M/ESPE, St Paul, Minn) and Meron (Voco, Cuxhaven, Germany). The cements w...

The mechanical properties of tissue engineering scaffolds are critical for preserving the structural integrity and functionality during both in vivo implantation and long-term performance. In addition, the mechanical and structural properties of the scaffold can direct cellular activity within a tissue-engineered construct. In this context, the aim of this study was to investigate the effects o...

In previous work (Peters and Poort, 1983), the stress distribution in axisymmetric models of restored teeth was analyzed by finite element analysis (FEA). To compare the tri-axial stress state at different sites, they calculated the Von Mises equivalent stress and used it as an indication for weak sites. However, the use of Von Mises' theory for material failure requires that the compressive an...

Bi2O3 is an excellent ceramic candidate for transformation-mismatch plasticity because of its low melting point, its allotropic nature and the rapid creep rate of its high-temperature d-phase. Transformation-mismatch plasticity, which has been reported in many polymorphic metals, alloys and composites [1], is a deformation mechanism taking place during a phase transformation: internal mismatch ...

PURPOSE The purpose of this study was to determine the amount and localization of functional stresses in implants placed in two different bone types (type 3 and type 4) with three different crown heights in the atrophic posterior maxilla using finite element analysis. MATERIALS AND METHODS A three-dimensional finite element model of the posterior maxilla was created from a computerized tomogr...

OBJECTIVE The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. METHODS Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8....

This paper presents the results of an experimental study on the residual compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing perlite and polypropylene (PP) fiber subjected to high temperatures. Cylinder specimens were subjected to various temperature ranges of 100, 200, 400, 800, and 1,000°C. The mixtures were prepared with AAC cementitious materials conta...

Regenerative medicine aims to engineer materials to replace or restore damaged or diseased organs. The mechanical properties of such materials should mimic the human tissues they are aiming to replace; to provide the required anatomical shape, the materials must be able to sustain the mechanical forces they will experience when implanted at the defect site. Although the mechanical properties of...