نتایج جستجو برای: tio2 fe3o4 nanocomposite

تعداد نتایج: 40048  

Journal: :Journal of environmental sciences 2015
Suttipan Pavasupree Stephan T Dubas Ratthapol Rangkupan

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO2) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as count...

Journal: :Catalysts 2022

Heterogeneous photo-electro-Fenton process is an attractive technology for the removal of recalcitrant pollutants. To better exploit presence irradiation source, a bifunctional catalyst with TiO2 nanoparticles embedded into iron–chitosan matrix was developed. The catalytic activity improved by optimization loaded content. prepared composite catalysts based on TiO2, Fe3O4 and chitosan were calle...

Journal: :physical chemistry and electrochemistry 0
hanieh etezadi department of chemistry, marvdasht branch, islamic azad university, marvdasht, iran leila baramakeh department of chemistry, marvdasht branch, islamic azad university, marvdasht, iran

abstract in this work, fe3o4-graphene oxide nanocomposite (go-fe3o4) was prepared as effective absorbent for magnetic solid phase extraction (mspe) of trace quantities of cadmium ions in environmental water and rice samples using 1, 2-dihydroxy anthraquinone-3-sulphonic acid, sodium salt (alizarin red s) and flame atomic absorption spectrometry (faas). the   go-fe3o4 was characterized by scanni...

One of the most important applications of carbon nanotubes (CNTs) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. In this study, Al-TiO2-multi walled carbon nanotubes (MWCNTs) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. Mechanical alloying is used to mix powders of aluminium, TiO2 and MWCNTs. TiO2 with the amo...

2016
Chiam-Wen Liew Arshid Numan Hsing-Lin Wang

Nanocomposite polymer electrolyte membranes (NCPEMs) based on poly(acrylic acid)(PAA) and titania (TiO2) are prepared by a solution casting technique. The ionic conductivity of NCPEMs increases with the weight ratio of TiO2.The highest ionic conductivity of (8.36 ̆ 0.01) ˆ 10 ́4 S ̈ cm ́1 is obtained with addition of 6 wt % of TiO2 at ambient temperature. The complexation between PAA, LiTFSI and T...

Journal: :Nanoscale 2013
Chan Lin Yang Song Lixin Cao Shaowei Chen

A unique nanocomposite C-TiO2 was prepared by the growth of TiO2 on carbon nanoparticles using a simple hydrothermal procedure. Transmission electron microscopic (TEM) measurements showed that the nanocomposites exhibited an average core diameter of approximately 5 nm with a rather well-defined lattice space (0.4 nm) that was somewhat larger than that (0.38 nm) of the (100) crystalline planes o...

2017
Azad Kumar Gajanan Pandey

In this paper, we have done the photodegradation of Methyl green dye in presence of prepared Ni0.10:La0.05:TiO2 nanocomposites. The nanocomposites of Ni0.10:La0.05:TiO2 was prepared by the solution impregnation method. The characterization of Synthesized TiO2 and Ni0.10:La0.05:TiO2 nanocomposites were done by X-Ray Diffractometer, SEM, TEM, UVVis, FT-IR, Band gap energy and BET. The photocataly...

2017
Mohammed M Rahman Mohammad Musarraf Hussain Abdullah M Asiri

Iron oxide ornamented carbon nanotube nanocomposites (Fe3O4.CNT NCs) were prepared by a wet-chemical process in basic means. The optical, morphological, and structural characterizations of Fe3O4.CNT NCs were performed using FTIR, UV/Vis., FESEM, TEM; XEDS, XPS, and XRD respectively. Flat GCE had been fabricated with a thin-layer of NCs using a coating binding agent. It was performed for the che...

In this study, TiO2-10%wt. carbon nanotube (CNT) nanocomposite powders were synthesized by sol-gel method at various hydrolysis rate affected by different reaction agents of acetyl acetone and benzyl alcohol. Crystallization of TiO2 was then achieved through calcination at 400 °C. The properties of nanocomposite powder investigated by scanning electron microscopy, X-ray diffraction and diffuse ...

2005
Yidong Lu Yuan Liu Jingjing Xu Chunhe Xu Baohong Liu Jilie Kong

A new kind of bio-nanocomposite photoelectrode was fabricated through direct immobilization of the bacterial photosynthetic reaction center (RC) proteins on a nanocrystalline TiO2 matrix prepared by anodic electrodeposition. The near-infrared (NIR)visible absorption and fluorescence emission spectra displayed that structure and activity of the RC remained unaltered on the nano-TiO2 film surface...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید