Plus-sizing in the tire industry is the growing practice of replacing a vehicle’s original equipment wheel size with a larger diameter wheel and replacing the tire with a lower aspect ratio tire of the same diameter. This practice is normally associated with aftermarket sales, and there is a growing trend for vehicle dealerships to fit these larger wheels/tires to new cars. This paper discusses...

DEFINITIONS NOTE: These definitions are for your general use and may differ from those applied by various recyclers. Verify the meaning of terms with the respective recycler. APPLIANCES/WHITE GOODS: Refrigerators, washers and dryers, and other household machinery with mostly metal content. Scrap metal dealers are not interested in appliances primarily composed of plastic. BALE: A densified and ...

tire manufacturing industry has a history of more than half a century in iran, where 14 thousand workers are employed. the old and semi-automated processes equipment, backward technology, and raw materials impurity lead to significant exposures to occupational carcinogens such as benzene. this study was to assessment of benzene exposures and evaluation the resulting cancer risk in two tire-manu...

We propose a simple rubber friction law, which can be used, for example, in models of tire (and vehicle) dynamics. The friction law is tested by comparing numerical results to the full rubber friction theory (Persson 2006 J. Phys.: Condens. Matter 18 7789). Good agreement is found between the two theories. We describe a two-dimensional (2D) tire model which combines the rubber friction model wi...

Today safety of the human life is major concern. Nowadays about 75% of the casualties has been observed due to the accidents during transport of the vehicle. These are especially due to the flaw in the tire pressure. Tire break avoiding is very important for safe driving in superhighway. Wireless Tire Pressure Monitoring System (TPMS) is used to detect whether one or more of the vehicle’s tire ...

In this paper, a control scheme for emergency braking maneuvers in automated highway systems (AHSs) and a new online identification scheme to determine the tire–road friction characteristics of the vehicle are presented. The proposed controller determines the required pressure in the master cylinder of the braking system to achieve maximum deceleration during braking, based on the estimation of...

The natural frequencies and mode shapes of pneumatic tires are predicted using a geometrically accurate, three-dimensional finite element modeling. Tire rubber materials and cord layers are represented independently using “shell element” available in COSMOS. The effects of some physical parameters such as the inflation pressure tread pattern, thickness of belts and ply angles to the natural ...

The objective of this study was to compare the rolling resistance of four common manual wheelchair tires (two pneumatic and two airless solid) and the solid tires used on a commercially available force- and moment-sensing wheel. Coast-down tests were performed with a wheelchair positioned on a two-drum dynamometer. Within each of three load conditions, tire type had a significant effect on roll...

The equations for wheelchair caster wheel shimmy are presented along with experimental data. The report includes the theory and performance of single wheel casters for a variety of tires, and a new design for wheelchair casters using a grooved dual-tread tire or co-rotating caster wheels. The dual-tread tire was found to significantly inhibit caster shimmy. The turning resistance due to a groov...