This paper deals with the experimental and numerical assessment of the vibration suppression of smart structures using piezoelectric shear actuators. Experimental results are presented for an adaptive sandwich cantilever beam that consists of aluminum facings and a core made of two piezoelectric shear actuators and foam. The electric Þeld is applied perpendicular to the poling direction of the ...

Linac beams in the Stanford Linear Collider (SLC) were driven into oscillation by transverse vibration of lattice quadrupoles at about 7 Hz. These quadrupoles are centered on 12-meter support girders located early in the linac. The vibrations were caused by ground motion at the 0.06 l.tm level which was amplified in the accelerator supports up to 5 pm. Seismic and support vibration measurements...

Temperature dependent elastic constants CijðTÞ of Cu60Zr30Ti10 bulk metallic glass (BMG) have been studied using MHz frequency range electromagnetic acoustic resonance (EMAR) from 4.5 to 300K. At ambient temperature, the BMG shows low shear/bulk modulus ratio (or equivalently high Poisson ratio) compared with that of corresponding crystalline state dues to the dense random packed glassy structu...

We report on an opto-mechanical resonator with vibration excited by compressive radiation pressure via stimulated Brillouin scattering [SBS]. We experimentally excite a mechanical whispering-gallery mode (WGM) from an optical WGM and detect vibration via the red Doppler shifted (Stokes) light it scatters. We numerically solve the stress-strain equation to calculate the circumferentially circula...

In this paper, the investigational results for a robust adaptive vibration control of a translating tensioned beam with a varying traveling speed are presented. The dynamics of the moving beam are modeled as an Euler-Bernoulli beam, in which the tension applied to the beam is given as a nonlinear spatiotemporally varying function. The moving beam span is divided into two parts, i.e., a controll...

investigations on vibration behaviors of railway track systems were attempted in this research. this was made by conducting a comprehensive field investigation into the free vibration of track systems and response of tracks to train moving loads. in-situ modal analysis was used in a railway track field as an efficient method of investigating dynamic properties of railway track systems. natural ...

Free asymmetric transverse vibration of a polar orthotropic thin annular plate with parabolically varying thickness in radial direction have been computed on the basis of classical plate theory considering both the peripheries of the plate elastically restrained against translation and rotation. The fourth order linear differential equation with variable coefficients governing the motion in the...

In this paper, the flow-induced vibration and flutter instability of cantilever carbon nanotubes conveying fluid and modeled as a thin-walled Timoshenko beam are investigated. Analytically nonlocal theory, transverse shear and rotary inertia effects are incorporated in this study. The governing equations and the boundary conditions are derived through Hamilton's principle. Numerical analysis is...

In this paper, the transverse vibration of cracked nano-beam has been studied based on modified couple stress theory. Crack is modeled by a rotational spring that creates a discontinuity. Frequency equations of cracked nano-beam with some typical boundary conditions are derived and the frequency parameter for different crack positions, crack parameter and length scale parameters value are calcu...

The free vibration analysis of the functionally graded cylindrical shell panels  with and without cutout is carried out using the finite element method based on a higher-order shear deformation theory. A higher-order theory is used to properly account for transverse shear deformation. An eight noded degenerated isoparametric shell element with nine degrees of freedom at each node is considered....