We report on the effect of femtosecond-laser-induced periodic surface structures (LIPSS) on the tribological properties of stainless steel. Uniform periodic nanostructures were produced on AISI 304L (American Iron and Steel Institute steel grade) steel surfaces using an 800-nm femtosecond laser. The spatial periods of LIPSS measured by field emission scanning electron microscopy ranged from 530...

The aim of this study was to evaluate the friction and wear behavior of ultra high molecular weight polyethylene (UHMWPE) against 3Y-TZP and a novel 3Y-TZP/niobium (Nb) biocomposite. The ceramic and the biocomposite materials were subjected to an accelerated aging process to evaluate the changes in the tribological behavior after this treatment. To carry out the tribological tests, a reciprocat...

An intermetallic nickel-titanium alloy, 60NiTi (60wt%Ni, 40wt%Ti), is shown to be a promising candidate tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, and is non-magnetic. Despite i...

The influence of the metal content (0-28 at.%) on the structural, mechanical and tribological properties of a-C:Cu films grown by pulsed filtered cathodic arc deposition is investigated. Silicon and AISI 301 stainless steel have been used as substrate materials. The microstructure, composition and bonding structure have been determined by scanning electron microscopy; combined Rutherford backsc...

Tribological properties of Ethylene-Propylene-Diene-rubber (EPDM) containing electron modified Polytetrafluoroethylene (PTFE) have been investiagted with the help of pin on disk tribometer without lubrication for a testing time of 2 hrs in atmospheric conditions at a sliding speed and applied normal load of 0.05 m·s–1 and FN = 1 N, respectively. Radiation-induced chemical changes in electron mo...

We report on the successful realization of a contactless, non-perturbing, displacement-measuring system for characterizing the surface roughness of polymer materials used in tribological applications. A single, time-dependent, scalar value, dubbed the collective micro-asperity deformation, is extracted from the normal-displacement measurements of normally loaded polymer samples. The displacemen...

Wide use of titanium alloys results from their unique physical and chemical properties 1 . Combination of low density and improved corrosion resistance with good plasticity and mechanical properties determines application of titanium alloys in such industries as aviation, automotive, power and shipbuilding industries or architecture as well as medicine and sports equipment. Despite numerous adv...

Lubricants are important factors in the tribology of total joint arthroplasty (TJA) surfaces, which are primarily comprised of a polished metallic or ceramic component articulating on an Ultra-High Molecular Weight Polyethylene (PE) surface. Wear particles released from the PE surface are the primary cause of TJA failure. The human body responds to the foreign, microscale particles by activatin...

In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...

Diamond-like nanocomposite (DLN) thin films were deposited on pyrex glass or silicon substrate by plasma enhanced chemical vapor deposition (PECVD) method. These types of films have their unique number of structural, mechanical and tribological properties, which are quite similar with MEMS material properties. DLN films provide a number of unique and