We present results from phase-field simulations of a two-dimensional model of dislocation microstructure development under increasing strain that incorporates the effects of the full, three-dimensional, microstructure in an approximate way. Despite its simplicity, the model yields quantitative predictions of both the deformation properties of face-centered cubic metals as well as key descriptor...

NiCrAlY coating was prepared on a stainless steel substrate by an arc ion plating machine and the annealing experiments were carried out at different temperatures using a tube furnace. The effects of annealing temperatures on the morphology, structure, chemical composition and phase structure of the coating were characterized by SEM, EDS and XRD, respectively. The change of microstructure is di...

In the present paper, the evolution of an oxidation process has been associated to the collective atomic arrangement, the microstructure one. This microstructural analysis encompasses a metallographic examination and a relation of electricity to chemical changes in salt-water solution. The electrochemical experimental techniques used include corrosion potential measurements. To seek a deeper un...

The microstructure of melt extracted Ti-44Al-8Nb-0.2W-0.2B-1.5Si fiber were investigated. When the rotation speed increased from 2000 to 2600 r/min, the appearance of the wire was uniform with no Rayleigh-wave default. The structure was mainly composed of fine α₂ (α) phase dendritic crystal and a second phase between dendrite arms and grain boundaries. The precipitated second phases were confir...

The mechanical behavior of a Fe80Zr10Cr10 alloy has been studied at ambient and high temperature. This Fe80Zr10Cr10 alloy, whoose microstructure is formed by alternate lamellae of Laves phase and ferrite, constitutes a very simple example of an in situ CMA phase composite. The role of the Laves phase type was investigated in a previous study while the present work focuses on the influence of th...

Four dimensional (4D, or 3D plus time) X-ray tomographic imaging of phase changes in materials is quickly becoming an accepted tool for quantifying the development of microstructures to both inform and validate models. However, most of the systems studied have been relatively simple binary compositions with only two phases. In this study we present a quantitative dataset of the phase evolution ...

Relations between the microstructure, mechanical properties and machinability of as-cast 65Cu-35Zn brass with various amounts of Al from 0 to 4.72 and Si from 0 to 3.62 wt% were investigated. Both Si and Al initially enhanced the UTS and toughness of the brass samples, which led to improvement in machinability due to a reduction in the main cutting force. A duplex brass with random oriented α p...

2Department of Radiology, Wonju Christian Hospital, Wonju College of Medicine, Yonsei University, 162 Ilsandong, Wonju, Kangwon-do 220-701, South Korea. OBJECTIVE. We compared ferucarbotran-enhanced MRI with triple-phase MDCT for the preoperative detection of hepatocellular carcinoma. SUBJECTS AND METHODS. Seventy-three consecutive patients with 121 hepatocellular carcinomas underwent ferucarbo...