−A comprehensive parametric study for a Fischer-Tropsch (FT) synthesis process has been conducted to investigate the relation between process parameters and reactor characteristics such as conversion, selectivity, multiplicity, and stability. A flexible model was employed for this purpose, featuring the dependence of Anderson-Shultz-Flory (ASF) factor on composition and temperature. All variabl...

This paper presents the synthesis and characterization of monometallic and bimetallic cobalt and iron nanoparticles supported on alumina. The catalysts were prepared by a wet impregnation method. Samples were characterized using temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), CO-chemisorption, transmission electron microscopy (TEM), field emission scanning electr...

Introduction The preparation and characterization of nanophase materials has received considerable attention in recent years, given their potential for improved performance as catalysts, high-strength materials, and semiconductor devices. For example, a recent breakthrough by Sun et al. (1) in the synthesis of highly-dispersed, silica-supported iron-platinum (FePt) bimetallic nanoclusters of co...

Introduction Hydrogenation of carbon monoxide to produce hydrocarbons, normally called Fischer-Tropsch synthesis (F-T synthesis), is one of the most important hydrogenation reactions due to its potential for the intermediate production of hydrocarbon fuels in the “postpetroleum” era. The reaction is favored at low-temperature and therefore reducing the particle size of the catalyst to several n...

Since its discovery in the 1920s, the Fischer-Tropsch Synthesis (FTS) has undergone periods of rapid development and periods of inaction. Within ten years of the discovery, German companies were building commercial plants. The construction of these plants stopped about 1940 but existing plants continued to operate during WWII. Two types of reactors were used in the German commercial plants: the...

support vector regression (svr) is a learning method based on the support vector machine (svm) that can be used for curve fitting and function estimation. in this paper, the ability of the nu-svr to predict the catalytic activity of the fischer-tropsch (ft) reaction is evaluated and the result is compared with two other prediction techniques including: multilayer perceptron (mlp) and subtractiv...

an alumina supported co/ni catalyst was prepared by sol-gel procedure to study the catalytic behavior during fischer-tropsch synthesis in a fixed-bed reactor. the effect of co conversion (10-50%) on hydrocarbon product distribution (ch4, c5+ and c2-c4 olefin selectivities) was studied. selectivity for ch4 decreased, while those of c5+ and olefin selectivities increased with increasing co conver...

  In this paper, modeling and optimization of Fischer-Tropsch Synthesis is considered in a fixed-bed catalytic reactor using an industrial Fe-Cu-K catalyst. A one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. The effects of temperature, pressure, H2 to CO ratio in feed stream, and CO molar flow on the mass flow r...