The increasing size of modern wind turbines also increases the structural loads caused by effects such as turbulence or asymmetries in the inflowing wind field. Consequently, the use of advanced control algorithms for active load reduction has become a relevant part of current wind turbine control systems. In this article, an individual blade-pitch control law is designed using multivariable li...

This paper presents a means for reducing the torque variation during the revolution of a vertical-axis water turbine (VAWaterT) by increasing the blade number. For this purpose, twodimensional CFD analyses have been performed on a straight-bladed Darrieus-type rotor. After describing the computational model and the relative validation procedure, a complete campaign of simulations, based on full...

the shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. in reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a s-shape profile. the pr...

Since the renewable resources of energy have become extremely important, especially wind energy, scientists have begun to modify the design of the wind turbine components, mainly rotor blades. Aerodynamic design considered a major research field related to power production of a small horizontal wind turbine, especially in low wind speed locations. This study displays an approach to the selectio...

The numerical simulation of flows over large-scale wind turbine blades without considering the transition from laminar to fully turbulent flow may result in incorrect estimates of the blade loads and performance. Thanks to its relative simplicity and promising results, the Local-Correlation based Transition Modelling concept represents a valid way to include transitional effects into practical ...

A morphing segmented concept is proposed herein for future extreme-scale wind turbine systems. The morphing may be accomplished by using segmented blades connected by screw sockets and a tension cable system. At low wind and rotor speeds, the segmented blades are fully tensioned and set at high pitch to ensure start-up and maximum power at low speeds. At high rotor rpm, the cable tension can be...

A thermodynamic process of power generation has been developed for a gas turbine, a steam turbine, and a compressor, supported by adiabatic expansion or compression processes. Recently, the possible inlet temperature of gas turbines has been increased to 1500°C or more, and the inlet temperature of steam turbines also has been increased to 650°C. At these high-temperature conditions, turbine no...

In this paper a numerical study is presented with the aim of evaluating the performance output of three Vertical Axis Wind Turbine (VAWT) configurations. Here using Computational Fluid Dynamics (CFD) a two-dimensional Multi Reference Frame (MRF) approach has been used to perform steady state simulations. For this purpose an inlet velocity of 4m/s has been used along with rotor blade Tip Speed R...

A process of detailed CFD and structural numerical simulations of the 1.5 MW horizontal axis wind turbine (HAWT) blade is present. The main goal is to help advance the use of computer-aided simulation methods in the field of design and development of HAWT-blades. After an in-depth study of the aerodynamic configuration and materials of the blade, 3-D mapping software is utilized to reconstruct ...