Article history: Received: 23.12.2013. Received in revised form: 15.01.2014. Accepted: 15.01.2014. Subcritical austenite reverse transformation quenching was used to improve the mechanical properties of 30CrMnSi steel, and the microstructure and mechanical properties of the samples were analyzed by subcritical austenite reverse transformation quenching. Experimental results show that subcritica...

A finite element model coupled with a thermokinetic model is developed to predict the phase transformation of the laser deposition of AISI 4140 on a substrate with the same material. Four different deposition patterns, long-bead, short-bead, spiral-in, and spiral-out, are used to cover a similar area. Using a finite element model, the temperature history of the laser powder deposition (LPD) pro...

Mechanical properties of machined components are controlled by inducing phase transformations in the outer layer of the materials. Induction hardening is one such manufacturing process where the surface hardness is enhanced while the core is retained with the original structure and characteristics. In this study, a mathematical model had been developed to predict the hardness and the volume fra...

In this article, a microstructural model of the Heusler alloy with shape memory effect caused by application an external magnetic field is constructed. The dynamics magnetization process are described using Landau–Lifshitz–Gilbert equation. For numerical implementation finite element method, variational equations corresponding to differential formulation problem used. Such approach makes it pos...

We have studied the vortex state problem systematically in YBa2CusOr-, system with twinned/untwinned single crystals. Different vortex states are observed on samples with different characteristics. Our detailed I V characteristics measured in different magnetic fields, at temperature below where the resistive ìkneeî occurs, show that the dynamics of the vortex motion depends on the sample chara...

Penta-twinned metallic NWs have recently received much attention due to their excellent mechanical properties. However, their elasticity size effect remains not well understood due to the large discrepancy in the reported experimental and simulation results. This paper reports an experimental effort to address the discrepancy about the size-dependent Young’s modulus of penta-twinned Ag NWs. Two...

A generalized phase transformation kinetics model is used to understand the martensite to austenite transformation in a cold-rolled and annealed metastable AISI 301LN ultrafine-grained austenitic stainless steel. The model shows that the presence of interstitial nitrogen and heavy cold-rolling is important to promote fast transformation kinetics, through rapid nitrogen-diffusion and austenite n...

We have investigated the possibility of producing a magnetic encoder by an innovative process. Instead of turning grooves in the encoder bar for precise positioning, we incorporated the information in 304L stainless steel by transforming the austenite to martensite after bar extrusion in liquid nitrogen and marking it with a laser, which caused a local transformation of martensite back into aus...

in this research, graphitization transformation of a commercial hypereutectoid steel called ck100 was studied by the dilatometric experiments at the range of 600 – 700 °c from prior martensitic structure. also the effect of quenching media on the initial graphitization time and completion of transformation has been discussed. also, graphitization transition from the different prior microstructu...

The influence of the free surface on martensitic transformation was examined by comparing the highest temperature at which martensite forms (MS), as measured using dilatometry, with surface–observations using confocal laser scanning microscopy. It is found that the proximity of the surface during confocal microscopy permits martensitic transformation to occur at a higher temperature, with a red...