PURPOSE The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten ha...

This data article provides a comparison data for nano-cement based concrete (NCC) and ordinary Portland cement based concrete (OPCC). Concrete samples (OPCC) were fabricated using ten different mix design and their characterization data is provided here. Optimization of curing time using the Weibull distribution model was done by analyzing the rate of change of compressive strength of the OPCC....

introduction: discoloration of resin composites is a common reason for replacement of these restorations. the aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. materials and methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek z250 resin composite. specimens were divid...

To reduce the labor cost and the workload required in the tobacco curing process, an intelligent tobacco curing control technique adopting color identification of the tobacco leaves is proposed. The HSI color space is used in color segmentation and the color recognition with fuzzy decision is used in the curing process. The curing controller can identify the curing stage by the color features o...

The effect of curing agent (6610) content and temperature on the rheological behavior of the epoxy resin CYD-128 was studied by DSC analysis and viscosity experiments. The results show that the resin system meets the requirements of processing technology. A complete reaction occurs when the curing agent content (40 parts per hundred resin, phr) is a little higher than the theoretical value (33....

This study evaluated the degree of conversion (DC) and ultimate tensile strength (UTS) of dual-cured resin cements heated to 50º C prior to and during polymerization. Disc- and hourglass-shaped specimens of Rely X ARC (RX) and Variolink II (VII) were obtained using addition silicon molds. The products were manipulated at 25º C or 50º C and were subjected to 3 curing conditions: light-activation...

Flue-curing is a post harvest conditioning process which strongly affects the tobacco leaf chemistry, and consequently the chemical properties of tobacco smoke. Several studies identified the major changes in tobacco chemistry occurring during flue-curing. It is not known how flue-curing contributes to changes in bioactivity of cigarette smoke condensate (CSC). In this study, tobacco leaves col...

OBJECTIVE Recent studies have shown that adhesives containing acidic monomers combined with composites can adversely effect the polymerization reaction producing low bond strengths. This phenomenon may also occur in making composite build-ups, jeopardizing one of the key factors for a successful core build-up restoration. The aim of this study was to investigate the contraction stress developme...

Different types of curing compounds were applied to lab and field concrete at different times after casting. Two application methods, single and double layer applications, were employed. Concrete properties, such as electrical conductivity, moisture content, sorptivity, degree of hydration, strength, and permeability were evaluated, and the results were employed for assessment of the curing eff...

Today concrete is most widely used construction material due to its good compressive strengt h and durability. Depending upon the nature of work the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain concrete. Plain concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired...