In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...

This paper aims to compare the tribo-mechanical properties and structure–property relationships of a wear resistant cobalt-based alloy produced via two different manufacturing routes, namely sand casting and powder consolidation by hot isostatic pressing (HIPing). The alloy had a nominal wt % composition of Co–33Cr–17.5W–2.5C, which is similar to the composition of commercially available Stelli...

Original scientific paper The microstructural transformations which took place during the welding of duplex steel as well as their influence on the resistance to particle erosion wear and cavitation erosion wear were investigated. A sample was cut from a 1.4462 rolled steel plate and heat treated in order to obtain a microstructure which would resemble, as closely as possible, the actual welded...

Chromium oxide coatings were deposited on low-carbon steel by radiofrequency reactive magnetron sputtering at different oxygen flux values. X-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy were used to investigate the microstructure of chromium oxide coatings. Varying oxygen flux changed the coating microstructure; as with increasing oxyg...

The adhesive wear process remains one of the least understood areas of mechanics. While it has long been established that adhesive wear is a direct result of contacting surface asperities, an agreed upon understanding of how contacting asperities lead to wear debris particle has remained elusive. This has restricted adhesive wear prediction to empirical models with limited transferability. Here...

Mo-W-C coatings with three different C/(Mo+W) ratios (5:1, 2.8:1 and 2.2:1) were deposited by using combined unbalanced magnetron sputtering (UBMS) high-power impulse (HIPIMS) technology. The influence of the ratio on coating microstructure related tribological properties at ambient temperature 200 °C studied in lubricated condition (up to 7500 m 1800 sliding distances, respectively). Results s...

In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...

The aim of this paper is to focus on the effect of cryogenic treatment on the microstructure, mechanical and wear properties of Al 6061 and Al 8011.  The first objective was to understand the degree to which hardness of these aluminium grades have been enhanced by giving  cryogenic on the specimens. The second objective is to check the wear resistance property of these two aluminium specimens i...

Adverse tissue responses to prostheses wear particles and released ions are important contributors to hip implant failure. In implant-related adverse reactions T-lymphocytes play a prominent role in sustaining the chronic inflammatory response. To further understand the involvement of lymphocytes in metal-on-metal (MoM) implant failure, primary human lymphocytes were isolated and treated with c...

*Cheema, N; +*Salkeld, S; **Hawkins, N; **Bailey, K; *Cook, S +*Fellowship of Orthopaedic Researchers, Inc., Metairie, LA [email protected] INTRODUCTION: The purpose of this study was to determine if particulate pyrolytic carbon debris was generated during wear simulation of the Regain™ lumbar nuclear disc replacement articulating on cortical bone. The Regain device is fabricated from pyrolyti...