OBJECTIVE To compare wear performance and resistance to crack propagation (K1C) of commercial restorative materials and their flowable variations. A potential correlation between three-body wear and fracture toughness, modulus of elasticity, fracture work, Vickers hardness, and filler content was investigated. METHOD AND MATERIALS Seven restoratives (five composites, one ormocer, and one comp...

The lubrication regime of articulating surfaces plays an important role for the understanding of the tribological conditions and the resulting wear performance of total disc replacement (TDR) of the spine. In the present study the lubrication regime for lumbar TDRs with ball and socket design have been assessed by applying the Hamrock-Dawson elasto-hydrodynamic lubrication theory. The effect of...

This work considers use neurofuzzy set theory for estimate abrasion wear resistance of steels based on chemical composition, heat treatment (austenitising temperature, quenchant and tempering temperature), hardness after hardening and different tempering temperature and volume loss of materials according to ASTM G 65-94. Testing of volume loss for the following group of materials as fuzzy data ...

In this paper we study the effect of NanoSiC particles on the mechanical properties for the polymer composite material. We using the epoxy resin (EPOBOND Epoxy) supplied from epobond for chemicals and electrical components in Egypt as matrix reinforced with silicon carbide nanoparticles with different weight percentage (5, 10, 15 and 20). The tensile tests were made by using LLOYD" Universal Te...

The dry sliding friction and wear behaviors of TC11 titanium alloy subjected to the ultrasonic impacting and rolling process (UIRP) were studied in the present work. The microstructure of the deformation layer and the morphology of the worn surfaces were observed. The results clearly show that the wear performance of TC11 alloy after UIRP is better than that of TC11 alloy before UIRP under the ...

PURPOSE The purpose of this study was to investigate the effect of different plasticizing aging solutions on wear resistance and hardness of selected universal resin-based dental composites. METHODS Three light cured (one nanofilled, two microhybride) and one hybride chemical cured composites were aged at 37 °C for 48 h in distillated water, ethyl alcohol solution or Listerine mouthwash. Afte...

Poly(lactic acid) (PLA) and starch copolymers are obtained by reactive blending varying the starch compositions from 0 to 60%. PLA is functionalized with maleic anhydride (MA), obtaining PLA-g-MA copolymers using dicumyl peroxide as an initiator of grafting in order to improve the compatibility and interfacial adhesion between the constituents. PLAþ starch blends without a compatibilizer do not...

No known surgical implant material has ever been shown to be completely free of adverse reactions in the human body. However, long-time clinical experience of use of the biomaterials has shown that an acceptable level of biological response can be expected, when the material is used in appropriate applications. This article deals with very specific wear resistance testing of biomaterials used f...

Following wear testing in a hip simulator, the bearing surfaces of 36 mm metal on metal total hip replacements showed the formation of tribochemical layers. These layers were investigated in a transmission electron microscope, and analysis was performed using electron energy loss spectroscopy, energy dispersive x-rays and selected area electron diffraction. The tribofilm formed at the edge of t...