An analysis of the results rail operation shows that up to a third all breaks in railway line and 12.9% withdrawn acute defective rails are associated with welded joints. This is largely explained by formation structures martensite sections joints burns. work presents studying joints, obtained under three welding modes (continuous flash welding, pulsating combined welding). The conducted studie...

In this paper, dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel is investigated experimentally. For this purpose, the experiments are designed using response surface methodology and based on four-factor, five-level central composite design. The effects of process parameters such as welding current, welding time, cooling time and electrode force are inv...

The joining of wires to various substrates (wires, plates, foils and semiconductor packages) is a ubiquitous process in the manufacture and modification of electrical and electronic devices. While spot welding is used extensively to attach lamp and vacuum tube filaments to base wires and foils, soldering is almost universally used to make chip to package and wire to substrate interconnections i...

Recently, steel structures have been accounted for a large percentage of the buildings due to their advantages such as higher execution speed and easier construction. In steel structures, welded joints are commonly used and their quality plays a key role in stability of buildings under applied loads. Hence, to increase resiliency of welded steel structures against natural hazards, welded joints...

TIG welding is an arc-welding process that produces coalescence of metals by heating them with an arc between a non-consumable tungsten electrode and the base metal 1 . Many delicate components in aircraft and nuclear reactors are TIG welded due to its reliability. Basically, TIG weld quality is strongly characterized by the weld pool geometry as shown in Figure 1. This is because the weld pool...

The high strength carbon steels such as API X65 is widely used to build the pipelines. In this study, the corrosion behavior welds region of the gas pipeline was studied. For this purpose, Shield Metal Arc Welding (SMAW) was used to evaluate the proposed method. The welding processes were performed with E6010, E6013, and ER70S-6 electrodes as filler metal and welding carried out in 3 passes by ...