We dedicate this work to Wolfgang Pompe, a very good friend and a good friend of the Materials Faculty at UCSB where he and his wife, Gisela, shared their lives and fellowship. Three different zirconia–alumina laminates, AZ50, AZ80, and AZ95, were fabricated via tape-casting thick Zr(3Y)O2 layers, dip-coating the zirconia tapes in a slurry containing a mixture of zirconia and alumina, stacking ...

Equilibrium calculations were used to optimize conditions for the chemical vapor deposition (CVD) of zirconia. The results showed zirconia formation would occur at high oxygen to zirconium atomic ratios (N4), low hydrogen to carbon ratios (b10), low pressures (b105 Pa) and high temperatures (N800 °C). Using these calculations as a guide, single-phase monoclinic zirconia coatings were deposited ...

BACKGROUND Despite drawbacks, cold-cured acrylic resin is still the most common material used in denture repair. Zirconia nanoparticles were among the reinforcements added to increase the strength of the resin. The effect on Candida due to the addition of zirconia nanoparticles to the resin has not been investigated. PURPOSE The aim of this study was to evaluate the effect of zirconia nanopar...

  Objective: Zirconia cores have limited light transmittance and data are scarce on light transmission through zirconia cores with and without the veneering ceramic.   Methods: In this in vitro study, Disc-shaped specimens (11.5 mm in diameter and 0.4 (0.05) mm in thickness) were fabricated of three types of zirconia namely Mamut, Heany and ZirkonZahn (n=5). A disc-shaped specimen (11.5 mm in d...

Biomass offers a renewable carbon source that could be utilized as a raw material in the chemicals industry. A potential route for the conversion of biomass feedstock’s into industrial chemicals is through the catalytic conversion of biomass sugars (glucose) to furan based compounds through an aqueous reforming process. However, to accommodate the transport of these bulky sugars within the cata...

The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt...

This review introduces concepts and background from the ceramics engineering literature regarding metastable zirconia ceramics to establish a context for understanding current and emerging zirconia-based dental ceramics.

The hydrogen solubility in zirconia (yttria stabilized zirconia, YSZ) using a tritium imaging plate (IP) technique has been measured in a temperature region ranging from 673K to 973K. The tritium distribution in the zirconia specimens was nearly uniform suggesting an equilibrated dissolution. The hydrogen solubility in specimens were rather low (around ppm or below) and showed Arrhenius type te...

STATEMENT OF PROBLEM Successful long-term bonding to zirconia ceramic remains a challenge, requiring special cements and surface roughening by airborne-particle abrasion, which might negatively affect the ceramic. PURPOSE The purpose of this study was to evaluate the shear bond strength (SBS) of composite resin cylinders to a modified zirconia surface using different luting techniques after t...

the aim of this study was to determine the effect of trenched zirconia bar on the von mises stress distribution of ips -empress ii core ceramics.the three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. the model was reinforced with zirconia bar (zb), zirconia bar with vertical trench (vzb) and zirconia bar with horizontal trench (hzb) ...