The microstructure, mechanical properties, and corrosion behavior of binary Ti-xPt alloys containing 5, 10, 15 and 20 wt% Pt were investigated in order to develop new Ti-based dental materials possessing superior properties than those of commercially pure titanium (cp-Ti). All of the Ti-xPt (x = 5, 10, 15, 20) alloys showed hexagonal α-Ti structure with cubic Ti₃Pt intermetallic phase. The mech...

A series of mixed iron and titanium oxide coprecipitates ranging in composition between 0 < Ti/Ti + Fe < 1 was synthesized and aged under varying conditions of pH, temperature and time in order to establish a working model for pedogenic titanium and titano-ferric oxides. X-ray powder diffraction (XRD), selective chemical dissolution, magnetic susceptibility, charge distribution and electron opt...

The corrosion behaviors of Ti, Ti-6Al-7Nb and Ti-6Al-4V alloys, and an experimentally produced Ti-0.5Pt alloy in 0.05% to 2.0% concentrations of Acidulated Phosphate Fluoride (APF) solutions (corresponding to 226 to 9,050 ppm fluoride at pH 3.5 or 3.6) were examined. While the corrosion of Ti, Ti-6Al-7Nb and Ti-6Al-4V alloys might occur easily even in a diluted 0.05% APF solution, dissolution o...

The effects of fluoride concentrations and pH on the corrosion behavior of pure titanium, Ti-6Al-4V, Ti-6Al-7Nb alloys and a new Ti alloy adding palladium, which is expected to promote a repassivation of Ti were examined by anodic polarization and corrosion potential measurements. The amount of dissolved Ti was analyzed by inductively coupled plasma mass spectroscopy. The surface of the specime...

Widespread planting of transgenic insecticidal (TI) crops for pest control has raised concerns about potential harm to nontarget arthropods. Because the first generation of TI crops produce single Bacillus thuringiensis (Bt) toxins causing little or no harm to most nontarget arthropods, they are not likely to cause such negative effects. However, varieties of transgenic crops with multiple Bt t...

combustion synthesis has been used to produce fe-(ti,w)c composites. a simple reactor was designed which made it possible to ignite the samples under controlled atmosphere. samples with different w/ti ratio were ingnited under argon atmosphere by an electric arc and a self-propagating reaction was initiated in each sample. different composites such as wc in fe-ti matrix, wc+(ti,w)c in fe matrix...