Much effort has been devoted to the synthesis of novel nanostructured MnO2 materials because of their unique properties and potential applications as cathode catalyst in Microbial fuel cell. Hybrid MnO2 nanostructures were fabricated by a simple hydrothermal method in this study. Their crystal structures, morphology, and electrochemical characters were carried out by FESEM, N2-adsorption-desorp...

Abiotic conversion of the reactive nitrification intermediate hydroxylamine (NH2OH) to nitrous oxide (N2O) is a possible mechanism of N2O formation during nitrification. Previous research has demonstrated that manganese dioxide (MnO2) and organic matter (OM) content of soil as well as soil pH are important control variables of N2O formation in the soil. But until now, their combined effect on a...

We recently synthesized a new modification of nanosized oxides such as titania [1] and manganese oxide [2] by delaminating precursor layered crystals into their elementary layers. The obtained materials have been named nanosheets on the basis of their two-dimensional morphology, as depicted in Fig. 1. The crystallite has an extremely small thickness less than 1 nm and a lateral size ranging fro...

Ag4Bi2O5/MnO2 nano-sized material was synthesized by a co-precipitation method in concentrated KOH solution. The morphology characterization indicates that MnO2 nanoparticles with a size of 20 nm are precipitated on the surface of nano Ag4Bi2O5, forming a structure like corn on the cob. The obtained material with 60% Mn offers slightly higher initial potential (0.098 V vs. Hg/HgO) and limiting ...

In traditional tantalum capacitors, the construction consists of a tantalum anode, Ta2O5 dielectric, and MnO2 as the cathode. The benefit of having MnO2, as the cathode, is the self-healing effect it provides. The conversion of MnO2 to a higher resistive state allows fault sites within the dielectric to be shut off from the rest of the capacitor. To mitigate problems developed during reflow, it...

Manganese dioxide nanosheet arrays with interconnected arrangements are easily synthesized on vapor grown carbon fibers (MnO2 NSAs@VCFs) by a simple wet-chemical method at low temperature. The conductive nature of the VCFs serves as a scaffold and easily reduces potassium permanganate species for the formation of hierarchical MnO2 NSAs@VCFs. When utilized as an electroactive material for pseudo...

We attempt to meet the general design requirements for high-performance supercapacitor electrodes by combining the strategies of lightweight substrate, porous nanostructure design, and conductivity modification. We fabricate a new type of 3D porous and thin graphite foams (GF) and use as the light and conductive substrates for the growth of metal oxide core/shell nanowire arrays to form integra...

α-MnO2 nanotubes were fabricated using a hydrothermal technique. Li, Na and K ions were introduced into MnO2 nanotubes to tailor their magnetic properties. It was found that with a doping concentration lower than 12 at%, the nanotubes showed ferromagnetic-like ordering at low temperature (<50 K), while antiferromagnetic coupling dominated their physical behavior with doping concentrations beyon...

In this study; metanol-diesel fuel, organometal MnO2 fuels were used to improve the properties of diesel fuel. Besides, the effect of methanol fuel on engine oil was also examined experimentally in a four cylinder, direct injection diesel engine running at 200 bar. Three different diesel fuels were prepared by adding 5, 10 and 15% methanol into diesel fuel. In order to prevent phase separation ...

Rechargeable magnesium battery (rMB) has received increased attention as a promising alternative to current Li-ion technology. However, the lack of appropriate cathode that provides high-energy density and good sustainability greatly hinders the development of practical rMBs. To date, the successful Mg2+-intercalation was only achieved in only a few cathode hosts, one of which is manganese diox...