the plain carbon steel “ck45” has relatively well mechanical and metallurgical properties and low cost. the purpose of this research was the property evaluation of this steel on abrasive wear and impact for using in plows and other tillage tools. tillage tool should resist in abrasive wear and impact simultaneously. several heat treatments were done on specimens of this steel. a standard test d...

The great success of cemented total hip replacement to treat patients with endstage osteoarthritis and osteonecrosis has been well documented. However, its long-term survivorship has been compromised by progressive development of aseptic loosening, and few hip prostheses could survive beyond 25 years. Aseptic loosening is mainly attributed to bone resorption which is activated by an in-vivo mac...

THE ATTRITIOUS AND FRACTURE WEAR OF GRINDING WHEELS by Stephen Malkin Submitted to the Department of Mechanical Engineering February 1968, in partial fulfillment of the requirements for the degree of Doctor of Science A detailed investigation is made of the nature and extent-of grinding wheel wear in finish grinding. The wear is broadly classified as either attritious or fracture wear. Attritio...

AIMS The corneal epithelial permeability during extended wear of disposable contact lenses was compared with that during daily wear of soft contact lenses. The study was performed to verify whether the extended wear of disposable contact lenses would result in a higher permeability value than the daily wear of soft contact lenses. A higher permeability makes the cornea more vulnerable for bacte...

INTRODUCTION: Polyethylene wear particles induce cytokine release by macrophage, which leads to osteolysis and aseptic loosening in total joint arthroplasties. Generation of polyethylene wear particles is one of the most important factors that affecting mid-term and long-term results of total hip arthroplasty (THA). Therefore, to reduce wear generation and to achieve better long-term results of...

A friction energy formalism is considered and adapted to formalize the fretting wear responses of adhesive wear and non-adhesive wear interfaces. It is shown that for non-adhesive wear tribocouples like hard coatings (TiN, TiC, etc.) the wear kinetics can be formalized using the accumulated friction dissipated energy. By contrast, adhesive wear contacts involving aluminium and titanium alloys d...

Tooth wear records valuable information on diet and methods of food preparation in prehistoric populations or extinct species. In this study, samples of modern and prehistoric hunger-gatherers and agriculturalists are used to test the hypothesis that there are systematic differences in patterns of tooth wear related to major differences in subsistence and food preparation. Flatness of molar wea...

Polyethylene wear is a great concern in total joint replacement. It is now considered a major limiting factor to the long life of such prostheses. Cross-linking has been introduced to reduce the wear of ultra-high-molecular-weight polyethylene (UHMWPE). Computational models have been used extensively for wear prediction and optimization of artificial knee designs. However, in order to be indepe...

Introduction While clinical reports have been encouraging for metal-on-metal (MOM) hip bearings, some adverse effects have been reported [1]. A puzzling phenomenon has also been observed in hip simulators wherein one or more MOM bearings revealed 2 to 9 fold higher wear than apparently ‘identical’ bearings [2,3]. This phenomenon we termed ‘breakaway wear’ (BA-wear) has yet to be investigated. T...

INTRODUCTION: Polyethylene wear particles induce cytokine release by macrophage, which leads to osteolysis and aseptic loosening in total joint arthroplasties. Generation of polyethylene wear particles is one of the most important factors that affecting mid-term and long-term results of total hip arthroplasty (THA). Therefore, to reduce wear generation and to achieve better long-term results of...