We illustrate the flow behaviour of fluids with isotropic and anisotropic microstructure (internal length, layering with bending stiffness) by means of numerical simulations of silo discharge and flow alignment in simple shear. The Cosserat theory is used to provide an internal length in the constitutive model through bending stiffness to describe isotropic microstructure and this theory is cou...

this study investigates propagation of mode i crack in b70 pre-stressed concrete sleepers by fracture mechanics approach. a new experimental analysis is done for notched b70 pre-stressed concrete sleepers with replica test and image analysis. a scanning electron microscope test (sem) and an image analysis are applied for the replica test in order to determine crack length and crack mouth openin...

We have learned that the two principal curvatures (and vectors) determine the local shape of a point on a surface. One characterizes the rate of maximum bending of the surface and the tangent direction in which it occurs, while the other characterizes the rate and tangent direction of minimum bending. The rate of surface bending along any tangent direction at the same point is determined by the...

The aim of this study is to determine some physical and mechanical properties of Paulownia tomentosa wood grown in Turkey. The samples trees harvested from Kargi in Corum. Physical properties including air-dry density oven-dry density basic density swelling, shrinkage and oven-dry and air-dry thermal conductivity coefficients; mechanical properties including bending strength, modulus of elastic...

This paper presents a fully printable sensorized bending actuator that can be calibrated to provide reliable bending feedback and simple contact detection. A soft bending actuator following a pleated morphology, as well as a flexible resistive strain sensor, were directly 3D printed using easily accessible FDM printer hardware with a dualextrusion tool head. The flexible sensor was directly wel...

This research was conducted to determine the impact bending strength and dynamic bending strength of Norway spruce wood from Slovenia. An accelerometer was added to the impact pendulum in order to capture the material’s response to an instantaneous load. Impact bending strength of specimens were determined by standard method measuring the height of pendulum before and after the break. While mea...

An adequate moisture resistance is a key element to guarantee the durability of asphalt materials. This paper identifies influence filler typology and bitumen content on mechanical response mortars before after water action. Two fillers were evaluated: Portland cement Calcium carbonate, along with different contents penetration (B35/50). Stiffness, ductility, fatigue evaluated through new proto...

This article reports on the first successful combination of micro Laue (µLaue) diffraction with an atomic force microscope for in situ nanomechanical tests of individual nanostructures. In situ three-point bending on self-suspended gold nanowires was performed on the BM32 beamline at the ESRF using a specially designed atomic force microscope. During the bending process of the self-suspended wi...

In scanning tunneling experiments on semiconductor surfaces, the energy scale within the tunneling junction is usually unknown due to tip-induced band bending. Here, we experimentally recover the zero point of the energy scale by combining scanning tunneling microscopy with Kelvin probe force spectroscopy. With this technique, we revisit shallow acceptors buried in GaAs. Enhanced acceptor-relat...