Activated carbon paper-based materials were prepared from softwood pulp, activated powder, and polyester fiber through wet forming process. Then polyethyleneimine was loaded on the using physical impregnation method to fabricate green, low cost, degradable PEI/activated composite adsorbent (PPCA) for removal of Cr(VI) drinking water. The surface characteristics analyzed by SEM, EDX, BET, FT-IR,...

The current importance of energy emphasizes the use of renewable resources (such as wastewater) for electricity generation by microbial fuel cell (MFC). In the present study, the native sulfate-reducing bacterial strain (R.gh 3) was employed simultaneously for sulfurous component removal and bioelectricity generation. In order to enhance the electrical conductivity and provision of a compatible...

In this work, separation performance of supported carbon membranes produced from Novolac Phenolic resin as the main precursor and carbon nanotubes as nanofiller were investigated for separation of CO2 from N2 and CH4. Supports were produced by carbonization of Novolac Phenolic resin-activated carbon mixture, and selective layer was coated by dip coating of prepa...

The efficacy of pretreatment on the dentin surface with an aqueous solution of glyceryl methacrylate (GM) was examined by measuring the wall-to-wall polymerization contraction of a light activated composite in a cylindrical dentin cavity, and by measuring the tensile bond strength to a flat dentin surface. All of the tested dentin surfaces were cleaned with neutralized 0.5 M EDTA and treated wi...

The long-term performance of two chemically activated composite resins was compared to that of one silicate cement. Bulk and cavosurface marginal discoloration was evaluated with both an indirect photographic method and the direct US Public Health Service evaluation system. The results confirmed that composite resins had superior performance but higher secondary caries incidence than did silica...

In this study, ZnO nanoparticles were loaded on activated carbon prepared from almond shell (ZnO-NP-AC). Then, this novel material applied as an efficient adsorbent for the ultrasonic assisted simultaneous removal of Basic Blue 41(BB41) and Basic Red 46 (BR46) in binary solution.  The efficiency of proposed activated carbon was enhanced by acid treatment and subsequent modification by physical ...

In this study, nanoporous silica aerogel and silica aerogel-activated carbon composites have been synthesized using a water glass precursor by cost effective ambient pressure drying method. Equilibrium and kinetics of benzene and ethyl benzene adsorption on silica aerogel and its composites have been measured in a batch mode at tree weights of adsorbent. For the first time, the experimental dat...

The purpose of this study was to evaluate the effect of primers on bonding between a silver-palladium-copper-gold alloy and an indirect composite material. Cast disks were air-abraded with alumina, conditioned with one of five primers (Alloy Primer, Luna-Wing Primer, Metal Primer II, Metaltite, M.L. Primer), and bonded with a light-activated indirect composite. Shear bond strengths were determi...

We report an effective and rare-earth free light conversion material synthesized via a facile fabrication route, in which organic fluorescent dyes, i.e. Rhodamine B (RhB) and fluorescein isothiocyanate (FITC) are embedded into activated boron nitride (αBN) to form a composite phosphor. The composite phosphor shows highly efficient Förster resonance energy transfer and greatly improved thermal s...