Nickel and cadmium usually enter the environment and water resources through wastewater, released by various industries, and may have adverse effects. The current study employs α–Fe2O3 nanoparticles of 20-40 nm in order to remove nickel and cadmium from the wastewater of Saba Battery Company. Also, it investigates the influence of effective parameters on adsorption process, including pH, contac...

The adsorption properties and mechanics of selected endocrine disrupting compounds; 17 β-estradiol, 17 α – ethinylestradiol and bisphenol A on locally available black tea leaves waste and granular activated carbon were investigated. The results obtained indicated that the kinetics of adsorption were pH, adsorbent dose, contact time and temperature dependent with equilibrium being reached at 20 ...

In this study, the adsorption of synthetic landfill leachate onto four kinds of activated carbon has been investigated. From the equilibrium and kinetics experiments, it was observed that coal based PAC presented the highest organic pollutants removal efficiency (54%), followed by coal based GAC (50%), wood based GAC (33%) and wood based PAC (14%). The adsorption equilibrium of PAC and GAC was ...

pollution of water resources by various pollutants is nowadays a global environmental issue. among the different type of water pollutants, dye represents a major polluting group. in this study, azolla filiculides roots have been used for adsorption of malachite green (mg), a cationic dyed from aqueous solution. in this study, effects of operating parameters such as initial concentration of dye ...

the discovery of mesoporous molecular sieves, mcm-41, which possesses a regular hexagonalarray of uniform pore openings, aroused a worldwide resurgence in this field. this is not onlybecause it has brought about a series of novel mesoporous materials with various compositionswhich may find applications in catalysis, adsorption, and guest-host chemistry, but also it hasopened a new avenue for cr...

U(VI)-phosphate interactions are important in governing the subsurface mobility of U(VI) in both natural and contaminated environments. We studied U(VI) adsorption on goethite-coated sand (to mimic natural Fe-coated subsurface materials) as a function of pH in systems closed to the atmosphere, in both the presence and the absence of phosphate. Our results indicate that phosphate strongly affect...

Magnesium aluminum hydroxides (MAH) of nitrate and carbonate forms were prepared by co-precipitation, dried at different temperatures, and employed as an adsorbent for pitch and stickies in papermaking. Results indicated that MAH that had been heat-treated had higher adsorption capacity to model pitch and stickies at neutral pH. Low-temperature-dried magnesium aluminum hydroxides of nitrate for...

This paper describes a preliminary study of the adsorption of toxic elements from synthetic wastewater in a batch mode. Clay minerals have been highly considered as inexpensive available adsorbents that adapt with the environment due to a special level and a high potential of adsorption. In the present research work, low-cost natural minerals of speiolite from the Iliato mine (located in NE Ir...

The effect of the ionic strength on adsorption of Cu on calcium montmorillonite was studied at concentrations ranging from 31 to 516 microM. An adsorption model was employed in the analysis of the data. When the background electrolyte was NaClO4, the ionic exchange was suppressed at 0.5 M concentration, and Cu adsorption took place on edge sites, reaching a plateau at about 24 mmol/kg. A furthe...

the removal of cd2+ and pb2+ ions from wastewater using p-tert-butyl-calix[4] arene was investigated in terms of initial ph, initial concentration, adsorbent dosage, contact time and temperature. the maximum adsorption occurred at the ph value of 6. the adsorbent studied exhibits high efficiency for cd (ii)and pb (ii) adsorption and the equilibrium states could be achieved in 10 min. adsorption...