Major noise sources of a home air conditioner are fan and compressor. Fan generates air flow noise main& and compressor is the main source of the vibration induced noise. In this study, finite element analysis, a method for design of experiment and a topology optimization method were used to find optimum shape of rubber mount, copper pipe and compressor base plate of a home air conditioner. For...

In this study, the air-side pressure drop and heat transfer performance of plate-fin and microchannel coils were tested under clean and fouled conditions. The heat exchangers were tested with two different types of dust, ASHRAE dust and Arizona Road Test Dust. The ASHRAE dust was found to have a very significant impact on the pressure drop of the microchannel heat exchanger, increasing the air-...

In this study, the air-side pressure drop and heat transfer performance of plate-fin and microchannel coils were tested under clean and fouled conditions. The heat exchangers were tested with two different types of dust, ASHRAE Standard Dust and Arizona Road Test Dust. The ASHRAE dust was found to have a very significant impact on the pressure drop of the microchannel heat exchanger, increasing...

in this research a flat plate solar air collector was investigated under direct solar radiation consisted of a slatted glass cover, perforated absorber aluminum sheets (porosity 0.0177, 0.0314 and absorber thickness of 2.5 mm). the effect of porosity on absorber efficiency of collector was evaluated. six levels of air mass flow rates (0.0056 to 0.0385 kg m-2 s-1) were adopted.average solar ener...

1 Motivation 1.1 A goal : the numerical modeling of the guitar This work is concerned with sound synthesis, the goal of which is to reproduce numerically the sound of musical instruments. We are interested in the study of the guitar. In our model the soundboard is coupled to one or more strings by means of a bridge. The soundboard is itself coupled with an open air cavity and the outer air. The...

When touched, a glass plate excited with ultrasonic transverse waves feels notably more slippery than it does at rest. To study this phenomenon, we use frustrated total internal reflection to image the asperities of the skin that are in intimate contact with a glass plate. We observed that the load at the interface is shared between the elastic compression of the asperities of the skin and a sq...

Related Articles Heat transfer and friction factor of solar air heater having duct roughened artificially with discrete multiple v-ribs J. Renewable Sustainable Energy 4, 033103 (2012) Heat transfer and friction characteristics of dimple-shaped roughness element arranged in angular fashion (arc) on the absorber plate of solar air heater J. Renewable Sustainable Energy 4, 023112 (2012) Experimen...

Introduction: There are two main designs used for unicompartmental tibial components. The first design, an all plastic component called an inlay, preserves bone on the outer edge of the tibia which is feasible using a robotically-controlled burring tool. Also, the depth of resection is small, preserving the strongest cancellous bone which is near the surface. The second design, called an onlay,...

The use of the generalized Snell's law opens wide possibilities for the manipulation of transmitted and reflected wavefronts. However, known structures designed to shape reflection wavefronts suffer from significant parasitic reflections in undesired directions. We explore the limitations of the existing solutions for the design of passive planar reflectors and demonstrate that strongly nonloca...