this paper reports results of a study regarding the activities of nano structure mn/γ-al2o3 and γ-al2o3 catalysts for oxidation of 2-propanol (as a model of volatile organic compound). nanostructure of catalysts was revealed using xrd, sem and tem techniques. catalytic studies were carried out in u-shaped packed bed reactor under atmospheric pressure and at the reaction temperature of 150- 500°...

Articles you may be interested in Investigation of gate leakage mechanism in Al2O3/Al0.55Ga0.45N/GaN metal-oxide-semiconductor high-electron-mobility transistors Appl. Characterization of interface states in Al2O3/AlGaN/GaN structures for improved performance of high-electron-mobility transistors Quantitative characterization of interface traps in Al2O3/AlGaN/GaN metal-oxide-semiconductor high-...

Transition aluminas form a basis of important catalytic and catalytic support materials due to their unique surface acidity, high temperature structural stability, and their viability for synthesis as high surface area materials [1]. The origin of transition aluminas attractive properties has been extensively studied in the past 50+ years, but despite this effort, there are number of structural...

The properties of CaCu3.1Ti4O12.1 [CC3.1TO] ceramics with the addition of Al2O3 nanoparticles, prepared via a solid-state reaction technique, were investigated. The nanoparticle additive was found to inhibit grain growth with the average grain size decreasing from approximately 7.5 μm for CC3.1TO to approximately 2.0 μm for the unmodified samples, while the Knoop hardness value was found to imp...

Investigation of the properties of Al2O3-on-GaN metal-oxide-semiconductor diodes is reported. A new method is shown to calculate the metal-oxide barrier height based on the onset of the FowlerNordheim tunnelling current regime in direct bias. The Ni/Al2O3 barrier was extracted, for the first time with this method, and it was found to match other reports in the literature. The dependence of the ...

Multilayered hard coatings with a CrN matrix and an Al2O3, TiO2, or nanolaminate-Al2O3/TiO2 sealing layer were designed by a hybrid deposition process combined with physical vapor deposition (PVD) and atomic layer deposition (ALD). The strategy was to utilize ALD thin films as pinhole-free barriers to seal the intrinsic defects to protect the CrN matrix. The influences of the different sealing ...

This report mainly focuses on the investigation of morphological, optical, and electrical properties of Al2O3/ZnO nanolaminates regulated by varying bilayer thicknesses. The growth mechanism of nanolaminates based on atomic layer deposition and Al penetration into ZnO layer are proposed. The surface roughness of Al2O3/ZnO nanolaminates can be controlled due to the smooth effect of interposed Al...

In order to elucidate the effect of sodium on the activity of ZSM-5 supported metal oxides catalysts (ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5) for the transesterification of soybean oil with methanol, ZSM-5 supported metal oxides were prepared with and without sodium hydroxide by impregnation. The metal compositions of the ZSM-5 supported metal oxide catalysts and the metal concentrations dissolved...

We report a detailed investigation of the structural and chemical characteristics of thin evaporated Al2O3 tunnel barriers of variable thickness grown onto single-layer graphene sheets. Advanced electron microscopy and spectrum-imaging techniques were used to investigate the Co/Al2O3/graphene/SiO2 interfaces. Direct observation of pinhole contacts was achieved using FIB cross-sectional lamellas...

Based on density functional methods, we investigate the origin of variations in electronic structures and dielectric constants of representative alumina polymorphs. We consider the most stable -Al2O3 and three metastable phases of alumina, , , and -Al2O3. Computed energy gaps are found to be in the order of , which can be understood based on electrostatic potentials at specific lattice sites; w...