Experimental researches on adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus were conducted. Results showed that performances of three filter media were all in line with Langmuir isotherm, and activated alumina adsorptive performance was much better than silica sand and anthracite coal for phosphorus removal. The adsorptive capacity of activated alumina, s...

Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...

Porous alumina was prepared via a sacrificial template method using as the matrix and starch carbon fibers pore-forming agents. After sintering, no residual agents were present. The density, porosity, pore structure of samples measured Archimedes’ mercury intrusion porosimetry (MIP). results showed that size distribution porous double-peak when content agent 20, 30, or 50 vol.%, but single-peak...

INTRODUCTION Incorporating a feldspar chemical bond between alumina filler particles is expected to increase the wear-resistant and flexural strength properties. AIMS AND OBJECTIVES An investigation was carried out to evaluate the influence of the feldspar chemical bonding between alumina filler particles on wear and flexural strength of experimental alumina/feldspar dental composites. It was...

Hydroxyapatite/alpha-alumina composites were prepared by means of high-energy vibratory ball milling. The effect of the addition of alumina, from 5 to 25 wt%, was investigated. x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) results indicated thathydroxyapatite andaluminawere themajorphases aftermechanicalmilling and only small peak shifts were observed. Transmission...

The aim of this study was to evaluate the bone regeneration of hydroxyapatite (HA)/alumina bilayered scaffold with a 3 mm passage-like medullary canal in a beagle tibia model. A porous HA/alumina scaffold was fabricated using a polymeric template-coating technique. HA/alumina scaffold dimensions were 10 mm in outer diameter, 20 mm in length, and with either a 3 mm passage or no passage. A 20 mm...

Increasing uses of engineered nanoparticles (ENPs) in commercial products and industrial applications has eventually resulted to their releases into atmospheric, terrestrial, and aquatic environments. However, knowledge gaps in ENPs toxicity, fate, and behaviour currently limit our ability to quantify risk assessment of materials with nanoscale dimensions, and therefore, the extent of the resul...

THE following comments are directed to the sections (2) ‘‘revisit to the grain growth problems in alumina’’ and (3) grain growth without a liquid phase in the article of concern. The purpose of this comment is to challenge the authors’ assertions and refute the following arguments, namely, first that ‘‘MgO can be considered a very effective grain growth promoter in the sintering of alumina,’’ s...

Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt. Chemistry department, Faculty of Science, Taif University, KSA. _________________________________________________________________________________________ Nine alumina samples of various modification techniques were subjected to thermal analysis via thermogravimetric analysis (TGA) and differential thermal analysis (DTA), in order t...

The ballistic impact performance of nanocrystalline zirconia-toughened alumina (nZTA) ceramics, comprising 15 wt% nano-yttria-stabilised zirconia in a sub-micron matrix, have been studied through depth penetration tests and compared to the results for monolithic alumina. resistance each material was evaluated by fitting against thickness ceramic targets. These show that, despite micro-Raman ana...