The introduction of copper as wire bonding material brings about a new challenge aluminum bond pad bimetallic corrosion at the copper/aluminum galvanic interface. Aluminum is well known to undergo pitting under halide-contaminated environments, even in slightly acidic conditions. This paper aims study morphology and progression influenced by different halide contaminations presence absence cont...

Aluminum is the most abundant metal in the Earth's crust and a highly sought after fuel source due to its extreme energy density. It has the ability to produce large quantities of hydrogen and heat when reacted with water making it an attractive fuel for underwater vehicles and ocean sensor platforms. The biggest challenge in using aluminum as a fuel has been overcoming the rapidly-forming oxid...

Hot dip aluminizing was carried out on the low carbon steel rod under optimized conditions. The aluminized samples were further oxidized at 1000̊C in air atmosphere at two different times of 20 and 60 minutes. Microstructure study and phase analysis were studied by scanning electron microscopy and X-ray diffraction methods, respectively. The characterization of the coating showed that, Fe2...

Silica phases were precipitated on aluminum surface by potentiostatic plasma electrolysis technique. Aqueous sodium silicate solutions with different concentrations were used for this purpose. SEM, EDS, XRD, surface profiles and polarization curves were used to study coatings properties. The results showed that the growth of the silica containing phases on aluminum surface was promoted by incre...

plasma electrolytic oxidation (peo) is the new, environmentally and cost-effective method for coating the metals. this method vastly has been studied for coating aluminum, titanium and magnesium and their alloys and recently for steel. in present study, ck45 steel samples were coated by peo method in order to improve corrosion resistance. during this process specimens were immerged in carbonate...

Copper/aluminum alloys are largely utilized in odontological restorations because they are less expensive than gold or platinum. However, tarnishing and important corrosion in intrabuccal prostheses made with copper/aluminum alloys after 28 days of use have been reported. Several kinds of food and beverage may attack and corrode these alloys. Copper is an essential component of several importan...

Abstract: Plasma electrolytic oxidation (PEO) technique was used to prepare ceramic coatings on the casted aluminum alloys containing ~5 and ~9.5 wt.% Mg. The applied voltage was controlled at 450V and 550V for evaluating the effect of this main parameter, as well as, magnesium content of the substrate on the microstructure and electrochemical corrosion behavior after PEO treating. The results ...

The composites combining aluminum and silica nanoparticles with the addition of tetramethylammonium hydroxide (Al-SiO2(T)) and butanol (Al-SiO2(B)) as mixing media have been successfully fabricated. Corrosion behavior of Al-SiO2 composites before and after exposure in 1M NaCl solution was examined using potentiodynamic polarization (Tafel curve analysis). The st...

POWDER METALLURGY (P/M) technology provides a useful means of fabricating net-shape components that enables machining to be minimized, thereby reducing costs. Aluminum P/M alloys can therefore compete with conventional aluminum casting alloys, as well as with other materials, for costcritical applications. In addition, P/M technology can be used to refine microstructures compared with those mad...