In this paper describe the different feeding technique for wireless microstrip antenna, which are microstrip line feed, coaxial plane feed, proximity coupled feed and aperture couple feed. Microstrip line and coaxial probe feeds are contacting scheme, in which RF power directly to the radiating patch. Proximity and Aperture coupled feeds are non contacting schemes ,in which electromagnetic fiel...

T his is the first of two articles describing a number of time domain solver 3D EM field simulations of an antenna feed consisting of a circular waveg-uide with a septum polar-izer and two external coaxial connector ports. Measurements of the actual S-parameters of a constructed feed were then compared to the simulations, to determine which mesh and solver settings afforded good accuracy withou...

In this paper, a compact multiple-input-multiple-output (MIMO)/diversity antenna with WLAN band notch characteristics, high isolation, and good ECC suitable for portable ultra-wideband (UWB) applications is presented. The proposed antenna has optimized dimensions of 29mm× 38mm. The antenna consists of two orthogonal circular monopoles with a 50Ω microstrip feed line. In addition, to enhance the...

The future National Polar-orbiting Environmental Satellite System (NPOESS) Microwave Imager/Sounder (MIS), a space-borne conical scanning radiometer, uses an offset main reflector with multiple antenna feedhorns to receive upwelling microwave radiation from the Earth’s surface and atmosphere. The offset reflector approach is a convenient and economic way to achieve the desired antenna footprint...

This paper gives information about construction of planar rectangular monopole antenna on Printed Circuit Board (PCB). Behaviour of such planar antenna is same as the rectangular patch antenna with finite ground plane which lies in same plane of given PCB. The designed antenna is a broadband antenna as its ratio bandwidth falls under broadband category. In comparison with monopole antenna broad...

Reflector antenna optimization schemes using array feeds have been used to recover antenna losses resulting from antenna distortions and aberrations and to generate contour coverage patterns. IIistorically these optimization have been carried out using the antenna far-field scattered patterns. The far-field patterns must be calculated separately for each of the array feed elements. For large or...

In this paper capacitive fed rectangular patch Microstrip antenna loaded with I-shape slots is developed. The model of Antenna uses the capacitive feed strip which is fed by coaxial probe using equivalent circuit approach. The proposed antenna has the impedance bandwidth of 58% in the frequency range 3.9GHz to 7.14GHz which shows wideband characteristics. Gain is almost constant in the entire b...

This paper presents a circular shaped microstrip antenna through an inset feed. Simulation results show that the designed antenna can be used as a dual frequency antenna with effective return loss of -33.43 dB and -35.90 dB at 1.609GHz and 2.239GHz respectively. The dual band operation of the proposed antenna is due to two exited modes (TM01& TM11).for the proposed antenna TM11 is the fundament...

Abstract—In this paper, ultra-wideband and miniaturization, technique for the microstrip monopole patch antenna (MMPA) in wireless applications is presented. Ultra-wideband was achieved by using printed modified ground plane on a dielectric substrate with 50Ω microstrip feed line. This technique allows the bandwidth of the MMPA to be ultra-wideband with satisfactory radiation properties and red...

A broadband inverted E-H shaped microstrip patch antenna is proposed and experimentally investigated. The antenna employs novel E-H shaped patch with L-probe feed technique. Prototype of the proposed antenna has been fabricated and measured for electromagnetic analysis including the impedance bandwidth, radiation pattern, and antenna gain. The designed antenna has a dimension of 80mm by 50 mm, ...