Stainless steel has been employed in many engineering applications ranging from pharmaceutical equipment to piping in the nuclear reactors and storage to chemical products. In this attempt, simulation of fatigue crack growth based on experimental results of austenitic stainless steel 304L was presented using AFGROW code when NASGRO mode laws adopted. Double through crack at hole specimen is use...

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...

The electrochemical polymerization of pyrrole (Py) in aqueous KNO3 solutions using Austenitic stainless steel electrodes by galvanostatic, potentiostatic and potentiodynamic methods was studied. Chronoamperometric experiments show different behavior of the current with time. Correspondingly, I-tx plots were made giving better fitting for x =3/2 suggesting a progressive nucleation with three-dim...

For understanding the microstructual details of nano-size oxide particles, three types of ODS ferritic and austenitic steels were examined by high voltage electron microscopy, EDS and AP-FIM. The oxide included Y, Ti and O and showed a shell-like structure with different composition. The shell-like structure depends on crystal structure of the matrix during fabrication process. To evaluate the ...

in this study, in order to investigate the effect of increasing the manganese content on microstructure and mechanical properties of high manganese austenitic steels, three alloys with successive increases in weight percentages of manganese (7.55, 13.1, and 16.5) and carbon (0.8 and 1.2) were cast in the presence of a constant amount of chromium (1.5 wt.%) and silica (0.6 wt.%). the samples exp...

in the present study, the effect of grain size on the austenite stability was studied by nanoindentationtests in a 304l stainless steel. thermomechanical processing based on cold rolling and annealing wasused to produce two different types of austenite: ultrafine grained (ufg) austenite with the averagegrain size of 0.65 μm and coarse grained (cg) austenite with the average grain size of 12 μm....

The anisotropic, heterogeneous and coarse granular structures of austenitic stainless steel welds may lead to important disturbances of the ultrasonic propagation : beam skewing and splitting, attenuation, backscattering and spurious echoes. Numerous studies were undertaken by EDF R&D and CEA for a few years to study these disturbances and to improve the ultrasonic NDT in nuclear applications. ...

Ultrasonic testing (UT) is widely applied for the inspection to various plants and structures. However, in the application to the inspection of high attenuation materials such as austenitic weld joints and the inspection near the surface, the SNR (Signal-to-Noise Ratio) decreases and it makes it difficult to assess the testing results. To solve this issue, systems of a signal processing by the ...

Radiation damage will be a major key point in the design of the many duplex components in fusion reactors. There is a substantial amount of available data showing that stress plays a major role in the onset, and possibly the rate, of void growth in austenitic stainless steels. There is also a strong support for models which predict a coupling of swelling and creep through the stress environment...

We have considered a semi-infinite crack embedded in a transversely isotropic medium and studied two special cases, one, in which the axis of symmetry is normal to the crack face and the wave incidence is arbitrary and another, in which the axis lies in the crack plane normal to the edge and the incident wave vector is also normal to the edge. The problem is of interest in Non-Destructive Evalu...