in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

The austenitic stainless steel was coated by dipping into a molten Al-12.4%Si alloy at 765oC. The effect of immersion times in the range of 60 to 900 s was investigated with respect to the phase nature, thickness, and microhardness. An uniform layer (~12 m) of Al12(Fe,Cr)3Si2 intermetallic with hexagonal crystalline structure is formed, irrespectively the immersion time. Microhardness of the c...

Neutron reflectometry has been successfully used to study adsorption on a stainless steel surface by means of depositing a thin steel film on silicon. The film was characterized using XPS (X-ray photoelectron spectroscopy), TOF-SIMS (time-of-flight secondary ion mass spectrometry), and GIXRD (grazing incidence X-ray diffraction), demonstrating the retention both of the austenitic phase and of t...

The paper presents results of an analysis of acoustic emission (AE) signals captured in the course of laser cutting of a steel sheet, and the analysis of the signals characteristic of particular phenomena occurring after the cutting process. In the course of cutting, continuous signals, which are related to the quality achieved of the laser cut, are measured. After laser cutting characteristic ...

The mechanical behaviour of the three advanced high strength steel grades, Docol 600DP, Docol 1200M and HyTens 1000, has been experimentally investigated under various types of deformation, and material models have been developed, which account for the experimentally observed behaviour. Two extensive experimental programmes have been conducted in this work. In the first, the dual phase Docol 60...

An artificial neural network (ANN) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304L austenitic stainless steel. The results of the ANN model are in good agreement with the experimental data. The model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austeni...

One of the critical issues for the application of iron aluminide coatings is the loss of Al from the coating into the Fe-base substrate alloys which do not contain aluminum. The interdiffusion behavior between chemical vapor deposited (CVD) aluminide coatings and ferritic and austenitic substrates is being studied for times up to 10,000h in the temperature range of 500-800oC. Coatings were synt...