Ag4Bi2O5/MnO2 nano-sized material was synthesized by a co-precipitation method in concentrated KOH solution. The morphology characterization indicates that MnO2 nanoparticles with a size of 20 nm are precipitated on the surface of nano Ag4Bi2O5, forming a structure like corn on the cob. The obtained material with 60% Mn offers slightly higher initial potential (0.098 V vs. Hg/HgO) and limiting ...

Nano-Fe3O4 attached to Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) as a superior catalyst has been utilized for the preparation of 3-alkyl-4-phenyl-1,3-thiazole-2(3H)-thione derivatives through a three-component reactions of phenacyl bromide or 4-methoxyphenacyl bromide, carbon disulfide and primary amine. The best results were gained in ethanol and we found that the reaction gave co...

In this study, we used advanced oxidation process (AOP)for the removal of a cationic and anionic blue dyes, namely Basic Blue 3 (BB3) and Acid blue 62(AB62), from aqueous solutions. Fenton reactions are mixture of H2 O2 and Fe2+. However this paper investigates the application of twelve different catalysts such as: FeCl2 , FeSO4, (NH4 )Fe(SO4 )2 , FeCl3 , Nano iron (Fe0 ), Fe(NO3 )3 , K2FeO4 , ...

We report a robust and direct route to fabricate a three-dimensional nano-foam of few-layer graphene (3D-NFG) with large area coverage via a chemical vapor deposition (CVD) technique. Pyrolysis of polymer/nickel precursor film under a hydrogen environment, simply prepared by spin-coating, leads to the creation of nano-foam in the film and the reduction process of nickel ions. Carbonized-C and t...

This paper presents the optimization process in sol-gel technique to synthesize Titanium dioxide (TiO2) thin films using in-house Nano-TiO2 powder. Nano-TiO2 powder was previously synthesized in our lab from ilmenite which is a tin mining byproduct using a modified hydrothermal method. By varying the mass of Nano-TiO2 powder and acetic acid (catalyst) concentration in the sol-gel process, highl...

Metal-assisted chemical etching (MacEtch or MaCE) is a robust and versatile process that has been adopted to overcome the limits of conventional semiconductor wet and dry etching technologies.[1–4] The advantage of producing high aspect ratio microand nano-structures with this simple and low-cost process has attracted attention for improving not only the etch quality but also the performance in...

Ruthenium oxide nano-catalysts supported on mesoporous γ-Al2O3 have been prepared by co-precipitation method and tested for CO oxidation. The effect of polyethylene glycol (PEG) on the properties of the catalyst was studied. Addition of the PEG surfactant acted as a stabilizer and induced a change in the morphology of ruthenium oxide from spherical nanoparticles to one-dimensional nanorods. Tot...

an efficient, simple and convenient route is described for the synthesis of biscoumarin (3,3'-(arylmethylene) bis (4-hydroxy-2h-chromen-2-one)) by using of recyclable catalyst tio2@ksf. in this method, we synthesis biscoumarin derivatives via 3multi-component reactions (3mcrs) of two equivalent 4-hydroxycoumarin with one equivalent of aromatic aldehydes using 20 mg nano tio2@ksf as homogen...

An efficient and green protocol for the synthesis of pyrazoles derivatives by one-pot reaction of different 1,3-dicarbonyl compounds with hydrazines/hydrazides has been developed using nano-sulfated zirconia, nano-structured ZnO, nano-g-alumina and nano-ZSM-5 zeolites, as the catalyst. The optical properties of the nano-structured catalysts and organic molecules were studied. The advantages of ...

A rapid and efficient method for the synthesis of bis-thiazolidinones has been achieved by pseudo five-component reaction of aldehydes, ethylenediamine and thioglycolic acid in the presence of nano-NiZr4(PO4)6 as catalyst under microwave irradiation. Nano-NiZr4(PO4)6 has been characterized by powder X-ray diffraction, scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), v...