Eddy current testing (ECT) is a conventional inspection method of heat exchanger tubes. Many types of probes have been developed depending on such tube conditions as tube shapes and materials. However, the vicinity of a tube expansion is still a difficult area to inspect. This is because there is a step-shape variation circumferentially on the inside surface and there is a ferromagnetic tube sh...

This paper deals with the experimental characterization of an array probe dedicated to the eddy current imaging of sub-millimetric surface breaking defects appearing in bore holes of metallic parts. The probe is constituted of a large inducer generating an uniformly oriented EC flow within the inspected material, and a sensing array probe featuring bobbin coils to sense the radial component of ...

Degradation of steam generator (SG) tubing due to both mechanical and corrosion modes has resulted in extensive repairs and replacement of SGs around the world. The variety of degradation modes challenges the integrity of SG tubing and, therefore, the stations’ reliability. Inspection and monitoring aimed at timely detection and characterization of the degradation is a key element for ensuring ...

Eddy current (EC) estimate of flaw size obtained from inservice inspection is often the primary means of assessing the structural integrity of steam generator tubes. Reliable prediction of failure pressure and leak rate in tubes with complex cracking requires more detailed information about the geometry and extent of degradation than is generally available from conventional bobbin coil examinat...

A thin 3 m diameter x 5 m, 1.5 T superconducting solenoid for the Fermilab collider detector facility (CDF solenoid) was constructed. Cool-down and excitation tests of the solenoid were carried out . The design current is 5000 A and the stored magnetic energy is 30x 106 J. The solenoid utilizes the forced flow cooling method of two-phase helium and does not have a permanent inner bobbin. The ma...