REACTION DE ALLIGATO FUSIONAL DE COBALT E CHROMO CON INVESTIMENTO.-Alterationes chimic occurrente intra le investimento ligate a phosphate durante le prisa e le cocer esseva determinate per technicas a diffraction de radios X. Es postulate le occurrentia de certe reactiones durante le processo. Tests del resistentia al compression effectuate a varie temperatures corroborava ille postulates. Ess...

AIMS The aims of this study were to investigate the influence of commercially pure titanium (PTi) and titanium-aluminum-vanadium (Ti-6Al-4V) alloys (TiA) on the final shade of low-fusing porcelain bonded to them and to compare the shade changes with those of three conventional metal-ceramic systems. METHODS AND MATERIALS A titanium casting unit was used to cast PTi and Ti-6Al-4V alloy specime...

Abstract In this paper, the pressing and sintering properties of three kinds copper-coated chromium composite powder copper-chromium mechanical mixed with same copper content were compared studied. The was prepared by a diffusion method, liquid electroless plating method an added binder. results show that increase in content, advantage copper-clad is more obvious. density, hardness, size shrink...

in the present study, the microstructure and mechanical properties of the dissimilar welding betweenastm a335 low alloy steel and er309l austenitic stainless steel were investigated using the gastungsten arc welding process. the welding of dissimilar materials between astm a335 low alloy steeland er309l austenitic stainless steel was found to have a significant effect on the microstructure when...

Powder metallurgy has been used for the manufacture of fully dense, which have not reacted composites consisting of a matrix of copper containing 50 -60 vol% particles with negative thermal ZrW2O8 expansion. On cycling between 25 and 300°C, the compounds showed coefficients thermal expansion which varies rapidly with temperature and significantly larger than expected by theory. Improvements in ...

A microstructural study was conducted on 15 cobalt-chromium-nickel alloys of the basic composition 40 Co-30 Ni-30 Cr. The alloys were strengthened by the addition of tantalum and tantalum-rich regions were found at the interdendritic spaces. The increase in Ta concentration caused a decrease in the concentration of the a phase and an increase in the amounts of the a phase. Excessive amounts of ...

2014 The phase diagram under pressure up to 4 kbar of an alloy containing 2.8 at % Fe in chromium has been determined by neutron diffraction. A hysteretic first order transition to a commensurate spin density wave phase, together with an apparently second order transition from the disordered paramagnetic phase to an incommensurate phase, is observed. No triple point could be found and there is ...

We report a high-performance amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) thin-film transistor (TFT) with new copper-chromium (Cu-Cr) alloy source/drain electrodes. The TFT shows a high mobility of 39.4 cm 2 ·V - 1 ·s - 1 a turn-on voltage of -0.8 V and a low subthreshold swing of 0.47 V/decade. Cu diffusion is suppressed because pre-annealing can protect a-IGZO from damage during the electrode...

We present a unique case of a symptomatic adverse local tissue reaction in a patient with a ceramic-on-ceramic total hip bearing surface. To our knowledge, this pathological finding has not yet been described in a ceramic-on-ceramic articulation without a cobalt-chromium alloy trunnion or modular neck component as a source of metal wear. We conclude that despite its mechanical mostly benign wea...