The prevention and control of peri-implantitis is a challenge in dental implant surgery. Dental implants with sustained antimicrobial coating are an ideal way of preventing peri-implantitis. This study reports development of a non- immunotoxicity multilayered coating on a titanium surface that had sustained antimicrobial activity and limited early biofilm formation. In this study, the broad spe...

long–term stability and oxidation resistance of aisi 439 ferritic stainless steel used as interconnects in solid oxide fuel cells can be improved by use of a protective coating. in this study the pack cementation method was employed to coat aisi 439 ferritic stainless steel with manganese. isothermal oxidation was conducted at 800 ºc for 200 hours in static air to investigate the role of coatin...

Introduction: Essential oils are used as flavoring agents in various foods. Layer-by-Layer (LBL) technique is a method in which the material is dipped into a series of different solutions containing oppositely charged polyelectrolytes. The aim of this study is to investigate the effectiveness of a multilayered edible coating with an antimicrobial compound (Lemon and Peppermint) in enhancing the...

radar absorbing materials, i.e. magnetite (fe3o4) coated carbon fibers (mccfs) were fabricated by electro-deposition technique. black-colored single spinel phase fe3o4 nanoparticles was easily synthesized by hydrothermal method using reduction of a fe (iii) - triethanolamine complex in an aqueous alkaline solution at 60-80 ◦c. uniform and compact fe3o4 films were fabricated on nitric acid treat...

In order to improve the oxidation resistance of ferritic stainless steel, it is possible to deposit a protective coating on steel substrate. In this research through the usage of pack cementation method a coating of titanium was applied on the surface of AISI 430 stainless steel. Scanning Electron-Microscopy (SEM), Energy- Dispersive X-ray spectrometry (EDAX) and X-ray diffraction (XRD) were us...

Chemical treatment was used to modify the surface of microarc oxidized (MAO) coating containing Ca and P. And the chemically treated MAO (C-MAO) coating was further heat-treated at 400-800 degrees C. The average roughness of the MAO and C-MAO coatings is about 250 nm; further heat treatment improved the roughness of the C-MAO coating. The chemical and heat treatment enhanced the wetting ability...

UNLABELLED An excellent transparent film with effective absorption property in near-infrared (NIR) region based on cesium-doped tungsten oxide nanoparticles was fabricated using a facile double layer coating method via the theoretical considerations. The optical performance was evaluated; the double layer-coated film exhibited 10% transmittance at 1,000 nm in the NIR region and over 80% transmi...

In this study different sized sustained-release coated pellets (6, 2.5 and 1 mm in diameter) were investigated using terahertz pulsed imaging (TPI). Ten pellets from each batch of metoprolol succinate layered sugar starter cores coated with a 75:25 (w/w) polymer blend of Kollicoat SR and Kollicoat IR (approximate coating thickness of 60 μm, according to the weight gain) were mapped individually...

We describe a type of multilayer dielectric coating designed to enhance the intensity of evanescent waves. The coating consists of a stack of alternating high- and low-index quarter-wave layers followed by a final low-index layer whose thickness is chosen to optimize the evanescent-wave intensity. Indirect measurements of the film properties are in good agreement with theory.