نتایج جستجو برای: compressive strength
تعداد نتایج: 220045 فیلتر نتایج به سال:
:the aim of this work is to investigate the influence of sodium oxide on properties of fresh and hardened paste of alkali-activated blast furnace slag from isfahan steel plant. the silica modulus (sio2/na2o) of activator was adjusted at 0.6 and a number of mixes were designed in such a way to contain different levels of sodium oxide including 1, 2, 3, 4, 5, and 6% by weight of dry slag. the mos...
according to the iranian code of practice for seismic resistant design of buildings, soft storey phenomenon happens in a storey when the lateral stiffness of the storey is lower than 70% of the stiffness of the upper storey, or if it is lower than 80% of the average stiffness of the three upper stories. in the combined structural systems containing moment frames and shear walls, it is possible ...
the design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc api fluid loss value, appropriate rheology and yield point for effective displacement, adequate compressive strength, which is critical for lightweight slurries, and finally stable cement column behind casing. the main objective ...
abstract due to the importance of using clay soil in many constructive projects such as, road foundation, irrigation canals and related hydraulic structures and etc., improvement of the physical and mechanical soil properties has been the main interest of the geo-technique specialists for years. in this regard different methods such as mixing clay soil with lime or cement have been used. it has...
introduction: because of the importance of vertebral compressive fracture (vcf) role in increasing the patients’ death rate and reducing their quality of life, many studies have been conducted for a noninvasive prediction of vertebral compressive strength based on bone mineral density (bmd) determination and recently finite element analysis. in this study, qct-voxel based nonlinear finite eleme...
introduction: the aim of this study was to evaluate the compressive strength of calcium-enriched mixture (cem) cement in contact with acidic, neutral and alkaline ph values. methods and materials: the cement was mixed according to the manufacturer’s instructions, it was then condensed into fourteen split molds with five 4×6 mm holes. the specimens were randomly divided into 7 groups ( n =10) an...
in this research the effect of randomly reinforced soil and soil cement with different percent of cement and fiber and different length of fiber was investigated. samples were prepared according to the maximum dry unit weight and optimum water content due to the corresponding compaction curves. compressive and tensile strength were conducted on samples for different curing times. regression equ...
Thin compressive layers within a laminar ceramic arrest large cracks (surface and internal) and produce a threshold strength. This phenomenon increases the damage tolerance of ceramics and will allow engineers to design reliable ceramic components for structural applications. The stress intensity factor derived for a crack sandwiched between two compressive layers suggests that the threshold st...
in this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, uniaxial compressive strength, tensile strength (brazilian test), elastic modulus, schmidt hammer rebound number have been done on samples. in addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید