This study reports on a modeling strategy for large Air-Cooled Condensers (ACCs). A 64-fan ACC was modeled under various crosswind conditions that investigated the ACC’s specific axial flow fan configuration. The model developed in two parts, an and heat exchanger model. fans were using Actuator Disk Model (ADM). exchangers’ pressure drop Darcy-Forchheimer porosity model, Effectiveness Number o...

Most full-field microscopes at synchrotrons exhibit a highly peaked illumination in the center of the field of view for stationary condenser and objective optics. This illumination pattern is typically reference-corrected by division with an image without the sample to correct for the uneven illumination. However, this correction does not rectify problems such as the poor signal-to-noise ratio ...

We present a laser plasma based x-ray microscope for the water window employing a high-average power laser system for plasma generation. At 90 W laser power a brightness of 7.4 x 10(11) photons/(s x sr x μm(2)) was measured for the nitrogen Lyα line emission at 2.478 nm. Using a multilayer condenser mirror with 0.3 % reflectivity 10(6) photons/(μm(2) x s) were obtained in the object plane. Micr...

Current implementations of structured illumination microscopy for depth-resolved (three-dimensional) imaging have limitations that restrict its use; specifically, they are not applicable to non-stationary objects imaged with relatively poor condenser optics and in non-fluorescent mode. This includes in-vivo retinal imaging. A novel implementation of structured illumination microscopy is present...

This study developed a magnetic-nanofluid (MNF) heat pipe (MNFHP) with magnetically enhanced thermal properties. Its main characteristic was additional porous iron nozzle in the evaporator and the condenser to form a unique flowing pattern of MNF slug and vapor, and to magnetically shield the magnet attraction on MNF flowing. The results showed that an optimal thermal conductivity exists in the...

This Paper Presents The Concept Of Analytical Study Ofvapour Compression Refrigeration System Using Diffuser And Subcoolingmainly Carried Out To Improve The Coefficient Of Performance Of System. To Improve The Coefficient Of Performance, It Is To Required That Compressor Work Should Decrease And Refrigerating Effect Should Increase. Initially The Diffuser Of Increasing Cross-Sectional Area Prof...

This paper presents a steady-state model that is useful for predicting the performance of centrifugal liquid chillers over a wide range of operating conditions. The model employs an elemental NTU-E methodology to model both the shell-and-tube condenser and the flooded evaporator. The approach allows the change in heat transfer coefficients throughout the heat exchangers to be accounted for, the...

In this paper, a new cooling system using a nacelle duct is proposed for the mechanical room in the household refrigerator. The conventional mechanical room consists of a condenser, a compressor and an axial fan. The axial fan is mainly responsible for cooling the condenser and the compressor. The new cooling system is developed by replacing the axial fan with the nacelle duct including the sma...