نتایج جستجو برای: constriction scour
تعداد نتایج: 17116 فیلتر نتایج به سال:
Traditional methods of measuring the profile of a scour hole or bed form have poor temporal resolution and may require the temporary cessation of the flow in order to be executed. These are undesirable characteristics since many hydraulic flows have unsteady water-sediment interfaces that can display considerable differences between their “dynamic” flow on and “static” flow off states. The pres...
The rapid worldwide growth of offshore renewable energy production will provide marine organisms with new hard substrate for colonization, thus acting as artificial reefs. The artificial reef effect is important when constructing, for example, scour protections since it can generate an enhanced habitat. Specifically, artificial structures can create increased heterogeneity in the area important...
The investigation of local scour below hydraulic structures is so complex that makes it difficult to establish a general model to provide an accurate estimation for the local scour dimension. During the last decades, Data Driven Methods (DDM) have been used extensively in the modeling and prediction of unknown or complex behaviors of systems One of these methods is Group Method of Data Ha...
Scour in the downstream of hydraulic structures is a phenomenon which usually occurs due to exceeding the velocity or shear stress from a critical level. In this paper by using the laboratory data by Borman- Jouline and De-Agostino research, it was tried to get more accurate equations in order to calculate the maximum depth of scour in the downstream of the water level regulation structures. Co...
Bridge abutments are usually located in the floodplain zone of rivers where velocity and shear stress are not uniformly distributed. The influence of channel geometry and lateral momentum transfer in compound flow field on the scouring phenomenon has not been fully investigated and understood yet. The impact of lateral momentum transfer on the local scour at abutments terminating in the floodpl...
Bridge abutments are usually located in the floodplain zone of rivers where velocity and shear stress are not uniformly distributed. The influence of channel geometry and lateral momentum transfer in compound flow field on the scouring phenomenon has not been fully investigated and understood yet. The impact of lateral momentum transfer on the local scour at abutments terminating in the floodpl...
Local scouring around the bridges piers has always been considered as a problem, especially in rivers. If we do not take the necessary actions to avoid the occurrence of this phenomenon or to reduce its influence, then the bridge's piers will be destroyed. Placing the bridge piers' foundation far from the earth's surface will turn out in a plan which is not economic at all. Experimental studies...
In this study, in order to examine the joint of the cable and the collar in control of scour around the bridge piles, experiments were carried out in a rectangular plexiglass flume as a direct path. The experiments were carried out using three different cable diameters, three different thread angles and three rounds of the cable threaded at a steady current in clear water. The results of this s...
Additionally, if the materials at downstream of bucket spillway are erodible, the ogee spillway is likely to overturn by the time. Therefore, the prediction of the scour after bucket spillway is pretty important. In this study, the scour depths at downstream of bucket spillway are modeled using a new meta-heuristic model. This model is developed by combination of the Adaptive Neuro-Fuzzy Infere...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید