In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...

carbon nanotube (cnt), due to extraordinary mechanical properties, is an effective stiffener as reinforcement in resin for fabricating of nanocomposites. it is demonstrated by adding a small amount of cnt to the matrix, the elastic modulus of matrix increases remarkably. in this paper, the elastic modulus of cnt reinforced nanocomposites is obtained two-dimensionally using a finite element meth...

With the increased use of composites for load-carrying structures, the ability to obtain strain and damage information is critical to maintain reliable structures in the field. A promising class of multifunctional composites with the ability to self-sense strain and/or damage is possible through the use of carbon fibers and carbon nanotubes. This paper presents a comparative study of two sensor...

Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along wit...

This article examines the effect of interfacial load transfer on the stress distribution in carbon nanotube/polymer composites through a stress analysis of the nanotube/matrix system. Both isostrain and isostress loading conditions are investigated. The nanotube is modeled by the molecular structural mechanics method at the atomistic level. The matrix is modeled by the finite element method, an...

For carbon nanotube transistors, as for graphene, the electrical contacts are a key factor limiting device performance. We calculate the device characteristics as a function of nanotube diameter and metal work function. Although the on-state current varies continuously, the transfer characteristics reveal a relatively abrupt crossover from Schottky to Ohmic contacts. We find that typical high-p...

This paper investigates some mechanical and rheological properties of low density polyethylene (LDPE) composites reinforced by multi-walled carbon nanotubes (MWNTs). It was found that the Young’s modulus and tensile strength of the composites can increase by 89% and 56%, respectively, when the nanotube loading reaches 10 wt%. The curving and coiling of MWNTs play an important role in the enhanc...

Carbon nanotubes are considered as excellent reinforcements for improving the properties of ceramic composites. This paper reviews the reported techniques for the preparation of various ceramic coated CNTs, CNT-ceramic composites, CNT-ceramic composite coatings, etc. It is noted that a wide range of techniques have been used to fabricate these composites. Their characterisation has revealed tha...