The choice of heat transfer fluids has significant effects on the performance, cost and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based on a new figure of merit capturing the combined effects of thermal storage capacity, convective heat transfer characteristics and hydraulic performance of the fluids. Thermal s...

Convective heat transfer and entropy generation in a 3D closed cavity, equipped with adiabatic-driven baffle and filled with CNT (carbon nanotube)-water nanofluid, are numerically investigated for a range of Rayleigh numbers from 103 to 105. This research is conducted for three configurations; fixed baffle (V = 0), rotating baffle clockwise (V+) and rotating baffle counterclockwise (V−) and a r...

The present study considers the numerical examination of an unsteady thermo-solutal mixed convection when the extra mass and heat diffusions, called as Soret and Dufour effects, were not neglected. The numerical simulations were performed in a lid-driven cavity, where the horizontal walls were kept in constant temperatures and concentrations. The vertical walls were well insulated. A finite vol...

An enthalpy-balance fuel-grain regression model is presented. The regression model, based on the longitudinally averaged fuel recession rates, is shown to accurately predict the chamber pressure, thrust and specific impulse performance of small and medium scale hybrid rocket motors. The key to the model predictions is the longitudinal enthalpy balance between the fuel grain heat of ablation and...

Both vapour and gas bubbles are known to significantly increase heat transfer rates between a heated surface and the surrounding fluid, even with no phase change. However, the complex wake structures means that the surface cooling is not fully understood. The current study uses high speed infra-red thermography to measure the surface temperature and convective heat flux enhancement associated w...

In this paper, we present experimental investigation of convective heat transfer characteristic in the inner tube fluid of miniature concentric double tube Hair-pin heat exchanger with constant heat flux. This work is carried out for distilled water and a mixture of distilled water and ethylene glycol (10%, 20% and 25% by volume) as heat transfer cold fluid flowing in inner tube to carry away h...

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...