Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...

In Direct Metal Laser Sintering objects are created by sequential sintering loose metal powder particles by means of laser technology. When the laser sintering process involves temperature gradients, thermal stresses develop. Corresponding residual stresses induce warping of the densified structure leading to unacceptable tolerance losses. This paper examines the role of laser beam scan pattern...

This paper investigates fabrication of functional thick metal films using simultaneous laser sintering and patterning along with the fundamental physical phenomena that govern the laser sintering process. The effects of the processing parameters on the quality of the fabricated components are investigated through a heat transfer analysis. We show that our process has potentials for metallizatio...

X-ray diffraction, energy dispersive spectroscopy, and atom probe tomography (APT) were used to assess the phase homogeneity of bulk sintered (Cu, Co, Mg, Ni, Zn)O transition metal high entropy oxides (TM-HEOs) across multiple length scales. These three methods applied both coarse-grain nanocrystalline TM-HEO samples using two different processing routes. Coarse-grain prepared by reaction sinte...

The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce1-xGdxO3-d, with x = 0, 0.05, 0.1, and...

Spark plasma sintering (SPS) is currently widely applied to existing alloys as a means of further enhancing the alloys' figure of merit. However, the determination of the optimal sintering condition is challenging in the SPS process. This report demonstrates a systematic way to independently optimize the Seebeck coefficient S and the ratio of electrical to thermal conductivity (σ/κ) and thus ac...

(Ti,Zr)C powder was sintered with WC-Co following an industrial process, including an isotherm at 1410 °C. A series of interrupted sintering trials was performed with the aim of studying the sintering behavior and the microstructural evolution during both solid-state and liquid-state sintering. Reference samples, using the same elemental compositions but with the starting components TiC and ZrC...

Selective electron beam melting (SEBM) is a relatively new additive manufacturing technology for metallic materials. Specific to this technology is the sintering of the metal powder prior to the melting process. The sintering process has disadvantages for post-processing. The post-processing of parts produced by SEBM typically involves the removal of semi-sintered powder through the use of a po...

We have studied the combined effects of the templated grain growth and magnetic alignment processes on sintering, anisotropic sintering shrinkage, microstructure development and texture in ZnO ceramics. Suspensions of 0-10 vol % ZnO template particles were slip cast in a 12 T rotating magnetic field. Sintering and texture characteristics were investigated via thermomechanical analysis and elect...

In this study, the procedure of sintering and heat treatment of Al2O3-SiC-MgO nanoceramic was considered. For improving the densification behavior and mechanical properties, experimental variables, such as sintering temperature and duration, which significantly influence the fracture performance of this nanocomposite body, were optimized. To obtain desired properties, several tests were conduct...