Copyright 2013 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...

Illumination non-homogeneity is the main problem which affects dense-array CPV systems. In a previous work we theoretically showed that connecting each cell in the array to a DC–DC converter module, leads to an increase of the power transfer efficiency with respect to classical series connection. This finding is here confirmed by two experiments making use of a cells’ array, one for a certain c...

This paper proposes a novel auto-reset forward DC-DC converter with inductor-switching technique to obtain the high performance by means of zero voltage switching and the fast transient response at steep load variations. The performance of the forward converter is strongly depending on the transformer reset-method. The Auto-reset method is used to recover the energy stored in leakage inductance...

In this paper, a novel high step-up DC-DC converter for distributed generation (DG) system is proposed. The concept is to utilize two capacitors and one coupled-inductor. The two capacitors are charged in parallel during the switch-off period and are discharged in series during the switch-on period by the energy stored in the coupled inductor to achieve high stepup voltage gain. In addition, th...

Sensitivity to carrier frequency offset (CFO) is one of the biggest drawbacks of orthogonal frequency division multiplexing (OFDM) system. A lot of CFO estimation algorithms had been studied for compensation of CFO in OFDM system. However, with the adoption of direct-conversion architecture (DCA), which introduces additional impairments such as dc offset (DCO) and in-phase/quadrature (I/Q) imba...

This paper presents a step up DC-to-DC converter with hybrid switch capacitor technique having high voltage conversion ratio with small switch voltage stress . The converter is suitable for the applications where high voltage conversion is required. The proposed DC-DC converter has low voltage ratted MOSFET switch and is connected to PV array to get high output voltage at small duty ratios. Hen...

We show that a finite Josephson Junction (JJ) chain, ending with two bulk superconductors, and with a weak link at its center, may be regarded as a condensed matter realization of a two-boundary Sine-Gordon model. Computing the partition function yields a remarkable analytic expression for the DC Josephson current as a function of the phase difference across the chain. We show that, in a suitab...

If the lines which connect the output terminal of DC-DC converter and the load are long, the voltage actually across load will be changed largely to produce the voltage drops by the impedances of the lines. Then, the terminal which senses the voltage across load is prepared apart from the output terminal of DC-DC converter, and it leads to the load, and the voltage across load is adjusted so th...

A novel current controlled CMOS ring oscillator is presented in this paper. Specially circuit structure and transistor parameters design is used to obtain good temperature coefficient. The designed ring oscillator circuit has been used in a CMOS step-up switching regulator controller which has been implemented using a 0.5μm double poly double metal CMOS technology. The test result shows that th...

Submitted: Jun 8, 2013; Accepted: Jul 17, 2013; Published: Jul 25, 2013 Abstract: In this paper different types of converters based on different types of switching cells have been studied and designed. The analysis of each converter has been carried out. The main objective of analysis is to find out the advantages and disadvantages of each converter and to find the converter suitable for the gi...