background and purpose: textile effluents are very difficult to treat satisfactorily due to high variations in their compositions. strong color is one of the main characteristics of textile effluent and, if not eliminated, it can cause serious problems to the environment. in the present study, multi-walled carbon nanotubes (mwcnts) were used as an adsorbent for the removal of reactive red-120 (...

a new, local agro-industrial waste was valorized by chemical treatment and tested for its ability to remove cationic dye from aqueous solution. tendu (diospyros melanoxylon) leaves refuse, a solid waste from bidi industry which caused disposal problem, was studied as a biosorbent. raw tendu waste (tlr), along with sulfuric acid carbonized tendu waste (tlr-cm) and tendu waste treated with dilute...

in this work, removal of c. i. acid red 14 was investigated by pumice stone as a low cost adsorbent. various parameters such as initial dye solution, contact time and ph were studied. removal of dye were increased by increasing of contact time and initial dye solution and deceased by increasing of ph. three isotherm models were studied. linear and non-linear regression analyses were used for de...

in this research, the removal of malachite green dye from textile wastewaters using polyaniline coated onto sawdust (pani/sd) has been investigated. ammonium peroxodisulphate was used as chemical oxidant for polymerization of polyaniline directly on the surface of sawdust. the effects of some important parameters such as ph, initial concentration, sorbent dosage, exposure time and temperature o...

industrial wastewater included the dyes one of the important sources of environmental pollution that founded in loom wastewater which are harmful for human health and environment. therefore, the purpose of this research was investigated removal of rb5 dye from aqueous solution by using of adsorption onto activated red mud as an cheap adsorbent. this research was experimental- laboratorial study...

Synthetic organic colourants, the majority of which are recalcitrant in nature, are used in many different manufacturing processes. The dyes are released into the environment in industrial effluents and are highly visible even at low concentrations (< 1 mg/l). Decolorisation of the dye CI Reactive Red 141 was investigated in a laboratory-scale anaerobic baffled reactor (ABR). The results of the...

The effect of immobilized dye concentration on protein complexation was observed using zonal chromatography. A monomeric protein, octopine dehydrogenase, was retained by a single interaction to a Sepharose CL-6B column containing 11.6 mM immobilized Cibacron blue F3GA. By contrast, a tetrameric protein, lactate dehydrogenase, was retained by the same column by multiple interactions. The degree ...

Efficiency and performance of Almond shell (AS) adsorbent for the removal and recovery of Acid Blue 129 (AB129) from wastewater is presented in this report. The influence of variables including pH, initial dye concentration, adsorbent dosage, particle size, contact time and temperature on the dye removal have been investigated in batch method by one at a time optimization method. The experiment...

The application of biodegradable chitosan fiber for healthy and hygienic textiles is limited due to its poor acid resistance in wet processing and poor antioxidant activity. In order to prepare chitosan fiber with good acid resistance and high antioxidant activity, chitosan fiber was first crosslinked by a water-soluble aziridine crosslinker, and then dyed with natural lac dye consisting of pol...

The adsorption removal of Triphenylmethane & Xanthene dyes onto a low-cost coal based adsorption (Charfines) and its efficiency in dye colour sorption was compared with activated carbon (F-400). Batch studies were performed and the results revealed that Charfines demonstrated on ability to adsorb the reactive Triphenylmethane & Xanthene dyes. The sorption interaction of reactive dye on to Charf...